Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy 90 Degree All Metal Servoless Outward Operating Retract Unit 90 Size (1pc)

Generating Links

Turnigy 90 Degree All Metal Servoless Outward Operating Retract Unit 90 Size (1pc)

Price:

Now save save $0.00 $0.00

$58.97
QTY:
Shipped From:
  • USA
  • Global
Already Purchased
Status:
In Stock
SKU:
344000051-0
want FREE shipping? Click here to find out more!

Well made and robust all metal servoless retract unit to suit up to 90 size models. This unit operates through an angle of 90 degrees so is perfect for many types of aircraft, (Please note: the leg retracts away from the motor unit). Incorporated in the retract is an advanced micro controller with intergrated circuit to automatically stop the retract when it reaches the end stops or if something jams, this protects the unit from over current draw and also stops the battery being inadvertently flattened.

Specs.
Max Model Weight: 7kg
Operating Voltage: 4.8~7.4V
Operation: Retracts outwards (away from the motor unit)
Operating Angle: 90 degrees
Transit Speed: 3sec/90 degrees @ 6V
Pin Size: 11mm
Mounting Hole Centers: Length 31mm / Width 35mm
Mounting Hole Diameter: 4mm
Overall Length: 84mm
Depth: 30mm (from mounting flange)
Width: 21mm (distance between mounting bearers)
Length of Lead: 150mm (JR type)
Weight: 77g

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Nathan | Verified Buyer

  • Quality
  • Overall
  • Value

1 of 2 faulty, my fix worked

Jan 30, 2021

Here same thing, 1 of teh 2 wasnt working. it went up or down once.
I tried the fixes that where posted here, like raising the magnet. but did not work.
Did some research and found that one of the reedswitches was always off.
Ordered new 7mm reed switches and soldered it in.
Works great now.
Would advise hobbyking to test al of there retract before shipping.
At this price range you can expect everything to work, every time.
Still happy customer

Rob | Verified Buyer

  • Quality
  • Overall
  • Value

One stop working after a few opening and closing

Nov 27, 2020

One stop working after a few opening and closing had to replace it

Mr3D | Verified Buyer

  • Quality
  • Overall
  • Value

Nice units

Jul 21, 2020

Purchased two of these units for a 3DLabPrint MkIX project. Units appear to be well made and have a smooth operation.
Unfortunately one of the units failed ‘out of box’, but I cannot fault Hobby King’s Warranty process, as the replacement was authorised within 24 hours of my providing pictures of the failed unit and a replacement arrived a couple of days later.
All working well now!

jean michel | Verified Buyer

  • Quality
  • Overall
  • Value

beautiful workmanship

Jun 28, 2020

beautiful workmanship.fonctionnement impeccable

jean michel | Verified Buyer

  • Quality
  • Overall
  • Value

beautiful workmanship

Jun 09, 2020

beautiful workmanship. no operating problem. precise locks

FFT | Verified Buyer

  • Quality
  • Overall
  • Value

1 of 2 not working

May 26, 2020

I'm very disappointed.. one of two motors cannot stand a minimum torque, it stucks in the middle of the course and sometimes shuts down the entire system (seems it asks for A LOT of Amperes when it fails). The other one is fine and works well.
Now I have a claim ticket under investigation and I have to wait who knows how much time to hopefully receive a working one (and I also hope not to pay the customs fees again).

Jt | Verified Buyer

  • Quality
  • Overall
  • Value

Retracts

Jan 07, 2020

These retracts are beautifully built and look fantastic.

Retract | Verified Buyer

  • Overall
  • Value
  • Quality

Outward retract

Sep 25, 2019

For what I was building the outward retract was the best option. Concerned about quality was an issue. HobbyKing was very responsive to an issue and immediately solved it. The design of the device is good I think quality testing should be done on all before shipping. And then redone.

Jaydee | Verified Buyer

  • Value
  • Quality
  • Overall

TURNIGY 90 DEGREE ALL METAL SERVOLESS OUTWARD OPERATING RETRACT UNIT 90 SIZE (1PC)

Jun 26, 2019

These retracts are well made and the design is a marked improvement over the pin style units. However their overall functionality is compromised by the inadequate torque produced by the retract motor which has in my experience exhibited low and inadequate retracting power. Some times resulting in incomplete retraction of gears when fitted with doors. HK has a promising product here but the motor torque issue must be addressed in order to assuage disappointment among its customers. Increased motor torque will make this retract a winner. Over to you HK

Jaydee | Verified Buyer

  • Quality
  • Overall
  • Value

TURNIGY 90 DEGREE ALL METAL SERVOLESS OUTWARD OPERATING RETRACT UNIT 90 SIZE (1PC)

Jun 14, 2019

These retracts are both excellent and disappointing at the same time. The clench bolt idea works very well and the housing is a very well made component. The actuator however lacks the torque needed for full actuation in flight if there are gear doors fitted. The air loads imparted by gear doors in my experience resist the actuator and cause it to cut out before full retraction. Also I have had cause to claim warranty on actuators failing prematurely. HK would have a great product if the actuator issue was addressed.

  1. 1
  2. 2
Customer files
viperjet 2m Download [878]
retract fix.jpg Download [32]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!