The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.
Output: Continuous 65A, burst 70A up to 10 seconds.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
BEC: Linear 4A @ 5V
Control Signal Transmission: Optically coupled system.
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000rpm
Size: 70mm (L) * 34mm (W) * 17mm (H).
High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
Wide-open heatsink design to get the best heat dissipation effect.
Improved Normal, Soft, Very-Soft start modes, compatible with aircraft and helicopter.
Smooth, linear, quick and precise throttle response.
Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
Programable via transmitter and Turnigy BESC programming card
Brake setting (we recommend using brake for only folding props applications)
Battery type(Li-xx or Ni-xx)
Low voltage cutoff setting
Factory default setup restore
Timing settings (to enhance ESC efficiency and smoothness)
Soft acceleration start ups (for delicate gearbox applications)
Low voltage cutoff type (power reduction orirnmediate shutdown)
Built-in BEC Output(5.25V or 6V)
Factory default settings:
Battery type: Li-xx (Li-ion or Li-Po)
Low voltage cutoff threshold: Soft cut-off (2.6V)
Timing setup: Low
Soft Acceleration Start Up: Normal
Low voltage cutoff type: Medium
Initial disappointment replaced with satisfaction. First one of these I received didn't function---no power to motor, no signal to receiver, no start-up beeps. The good news story is that I used online chat with Hobbyking to describe my problem, filled out an RMA form on line, sent a link to a short video demonstrating my problem with the ESC, and three days later I received a brand new replacement from Hobbyking free of charge. Sometimes an item just has a glitch in manufacturing, but Hobbyking's service reps were helpful, concerned, courteous, and extremely responsive in solving my problem. H.K. is working hard on customer service, in addition to having great selections at great prices.Bon contrleur rien dire construction de bonne qualit et prix trs comptitif .
mont sur un epsilon comptition V2I have this esc on my align trex 450 dfc pro running 6s. Barely gets warm. Heat sink really does its job and programs easily. Im surprised how tough this unit is. Would definitely recommend to othersVery good esc! Use it in a hotliner with ntm 35-36a it draws Just over 80 amps static. Over 60 flights now andNever had any problems. comes down hand warm.estou testando ha meses e no apresentou defeito.I love this AE range of Turnigy. Solid ESC with switched BEC.
The lipoly threshold can be set to 3.3volt which is a great feature. This way if the ESC does kick-in, you still have some juice left to land.
Unlucky there is no programmer card or usb cable for these AE range. But programming the ESC with the stick is not too complex. Just read careful the manual and you can figure it out. Great product!I am using this ESC with my Prime Jet 8-32 Ultra with an NTM 28-36 3000 Kv motor, 4.75 x 4.75 APC prop, and 4s battery. It has provided ultra smooth response and never comes down hot. The motor gets warm and do does the battery, but the esc is always cool. Motor is pulling 755 watts.THESE ESC'S DO A FANTASTIC JOB RUNNING HIGH POWERED MOTORS VERY RELIABLE AND GOOD HEAT SINK USE STRAIGHT UP OR PROGRAME TO YOUR REQUIERMENTS YOU WILL NOT BE DISAPOINTED GOOD PRICE ASWELL.Excellent easy to program ESC. Will be buying another one for my other TREX 450 Pro. High Quality and great price.Hobby-King kann ich jedem empfehlen.