- Product
Description -
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.
The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.
Specs.
Turns: 6T
Voltage: 2~3S Lipoly
RPM/V: 2500kv
Internal resistance: 0.02 Ohm
Max Loading: 35A
Max Power: 405W
Shaft Dia: 3.175mm
Bolt holes: 16mm & 19mm
Bolt thread: M3
Weight: 80g
Motor Plug: 3.5mm Bullet Connector - Product
Specifications -
Additional Information
-
SKU:
SK3-2836-2500
-
Brand:
No
-
Weight(g)
150.00
-
Length
110.00
-
Width:
45.00
-
Height:
80.00
-
Kv(rpm/v)
2500.00
-
Max Currents (A)
35.00
-
Power (W):
405.00
-
Length B (mm):
36.00
-
Can Length D(mm)
23.00
-
Max Voltage(V)
11.00
-
Shaft A(mm):
3.18
-
Unit Weight (g):
80
-
Diameter C(mm)
28.00
-
Total Length E(mm)
54.00
-
Resistance (mh):
0.00
-
SKU:
- Community
Discussions -
- Rate&
Review -
great lil motor runs well plenty of torqueVery fast and so much power from this motor!!!
Run it on my bix 2 with 50a esc by HK
with 2200mah turnigy battery
Run time on 3/4 trottle is about 4-5 min
GreatVery good engine, fast and reliable. If you put it in a pushing configuration make sure it has enough air flow as it may be prone to overheating.
PIET :IN MY CASE ITS NOT A GOOD MOTOR ITS GET BURNING AFTER THE NEXT PROBE
FROM THE TRANSMITTER.
Very powerful, balanced well.
That is my own test data:
Master Airscrew Propeller 5.5x4.5:
(Windsor Gas Propeller)
3S 100pcnt 1050g 36A / 10.7V
3S 50pcnt 550g 16A / 10.7V
Turnigy High Speed Propeller 5.5x4.3:
3S 100pcnt 850g 40.3A / 10.8V
3S 50pcnt 440g 16.6A / 10.8V
TGS Sport Propeller 4.75x4.75:
3S 100pcnt 620g 25A / 10.8V
3S 50pcnt 380g 12.9A / 10.8V
4S 100pcnt 810g 31.8A / 14.8V
4S 50pcnt 500g 16A / 14.8V
TGS Sport Propeller 4.5x4.5:
4S 100pcnt 800g 28A / 14.8V
4S 50pcnt 500f 15.8 / 14.8V
HobbyKing 40A ESC 4A UBEC
3S battery: Turnigy Nano-Tech 2200mAh 35-70C
4S battery: Rhino 2150mAh 30C
My best favorite pusher motor! On a 6 x 4 APC you can have unlimited vertical and great speed!Motor had little dents but not at rotating parts.
Besides that it funktiond well.
I only have a slower sk3 for a longer time and that is very goodMaybe the best motor I have ever tried! Your plane will be a rocket with it!Big plans for this little gem, welcome to the over 100mph club!!As mentioned before this hammers 25 flights 6x4prop 4s 2200mha turnigy battery in bixler 1.1, esc turnigy 45amp great for 1500ft in 15sec a fantastic match up still going strong a ust get ; it bad point is the motor wires are very stiff but once its in you wont regret it / - Upload
Videos - Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesDrawing download now [89.96Kb]
Related Products
