Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival but surpasses the quality of many leading motor manufacturers on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.
The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.
Voltage: 4~5S Lipoly
Internal resistance: 0.033 Ohm
Max Loading: 53A
Max Power: 1190W
Shaft Dia: 5.0mm
Bolt holes: 25mm
Bolt thread: M3
Motor Plug: 3.5mm Bullet Connector
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
I do not understand how you guys run 6S batteries when the specs state max Volt as 19??? I want more power out of mine, so I'll try it, but if I smoke my motor in my Slick 55 I'll hunt you down and shoot you out of the sky with my Bixler 2.Great looking motor, complete with all needed accessories, nice box, ... Now the only thing that is left is a test flight.I ran it on a 17 x 6.5 on 6s 7.000 rpm and 550 watts
on a 17 x 10 on 6s 5.600rpm and 900 watts it does get a bit hot on this prop which is installed on an ASW 19 of 3.75m wingspan weighing in at 5 kg, it fly's from it launching dolly at about 25 on the 17 x 10 and 10 on the 11 x 6.5Very good product.
Test with Zippy 5s 3300mah 35c, and aeronaut folding prop: 20x12 - 900W - 44A, 18.5x14 - 870W - 43A
Test with old 4s battery 25C, only 430W with 18.5x14 folding propAbsolutely great. The motor is rated at 2-5s but I'm running a 13x8e with 6s , 24amps and about 650w , it's pulling my 1870mm super cub around with ease. Flight times are long , flew for 15mins and used about 25pcnt not even a hint of getting wam very pleased with the hardware, can be set up either way round with the provided adaptersSchaut gut aus. Paxiseinsatz fehlt noch.Replaced my Turnigy 50-55 400kv motor with this motor as it is 2ozs lighter and can turn a bigger prop (16x6) on 6s at the same current. No problems.