United States
Shipped From:
  • Global

Turnigy Aerodrive SK3 - 6364-213kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 6364-213...

Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quali...

Now save save $0.00 $0.00


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufacturers on the market today.

The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.

Turns: 16T
Voltage: 10S Lipoly
RPM/V: 213kv
Internal resistance: 0.023 Ohm
Max Loading: 65A
Max Power: 2550W
Shaft Dia: 8.0mm
Bolt holes: 32mm
Bolt thread: M4
Weight: 706g
Motor Plug: 4mm Bullet Connector


Additional Information

  • Blade Count:
  • Speed (Sec/60deg):
  • Torque(kg)(min. 0.01kg)
  • Diameter X(Inch)
  • A(mm):
  • B(mm):
  • C(mm)
  • D(mm)
  • E(mm):
  • F(mm):
  • SKU
  • Weight(g)
  • Length:
  • Width:
  • Height
  • Kv(rpm/v)
  • Max Currents (A):
  • Power (W):
  • Length B (mm)
  • Can Length D(mm)
  • Max Voltage(V):
  • Shaft A(mm):
  • Unit Weight (g)
  • Diameter C(mm)
  • Total Length E(mm):
  • Resistance (mh):

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Well, everything mentionned is wrong.
My measures :

10S 4000 with a 20x10 = 100A and almost 4000W.
Motor works like a charm but might be better and its comfort zone with a 19x10 or so.
this engine is a great value, great quality and works so wonderful. i am using it on my edge 540 2meters wingspan and around 9kg AUW, with a 19x10 wood prop, and 100a Yep esc, 10s lipo a lot of power
Wahnsinns E-Motor, Leistung ohne Ende. Habe den Motor in einer 2 Meter Corsair mit ca. 7KG Geweicht verbaut. Angetrieben von 10S und an einer derzeitigen Testlatte 22x13.

Testdaten derzeit: 56 Ampere und 1900 Watt.

Luft absolut strungsfrei!!!

Um Das geld kann ich den Motor nur jedem nahe legen der einen Vernnftigen Antrieb fr ein Grossmodell sucht!
I am using this motor in a Seagull Edge 540 180.

6.750 gr ready to fly.

10S 5000mah Turnigy Lipo.

TURNIGY K-Force 120A-HV.

Turnigy 19x10 Wood Propeller.

Very pleased with the power of this motor. Good Vertical with full throttle.

7 minutes flights and the motor is barely warm, and used a little less than 3000mah.
Installed this onto my Giant U-Can-Do 3D conversion. First flight was done without checking current flows as I couldn't get my wattmeter connected (wrong ends!)

Power system is a 12S 4000 40C pack, a 20x8 Xoar prop and a Sentilon 100 ESC. Checked it later - 85A, 3200W ! OMG.

Have dropped to a 20x6 Zinger prop - now drawing 62A and 2500W.

Next I'm going to try 10S and the original 20x8 prop, though I expect it to be in the same 65A / 2500W range...
Great motor, very well built. Worth the price!
Questo motore davvero quello che cercavo. Con 10S Lipo da 5000mah 30C tira una 20x8 a 65A e 2400W. Tiro statico la bellezza di 10kili. Ottima anche la confezione e l'imballaggio. A breve lo prover anche con la 20x10 ma sicuramente saremo intorno ad 80A di consumo.

This engine is really what I wanted. With 10S Lipo 5000mAh 30C pulls a 20x8 at 65A and 2400W. Static trust is 10kg. Excellent also the packaging. Next week I test it with 20x10 but surely it will be around 80A of consumption.
Little more expensive than most of the others of this size, but beautifully made. Pleasantly surprised with the helicoil inserts on the mounting threads. Overall nice finish. One thing you still must do is glue the magnets, mine worked their way loose and started rubbing.
I recommend filling the gaps with Devcon Fasmetal 10 before using this motor.
Sehr hochwertig verarbeiteter Motor mit mchtig Power. Betreibe ihn an 10s und 20x10 Prop in einer Staufenbiel Yak 54 mit 1,95m Spannweite. Die Stromaufnahme bei Vollgas liegt bei ca. 85A. Ist evt. grenzwertig. Ich bin mit dem Kauf sehr zufrieden.
Upload video

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.