The Turnigy series are programmable car and boat brushless speed controllers. The Turnigy series boasts features such as large burst currents, programmable breaking and reverse, low resistance, 2-3 Lipo cell capable and low weight.
Cont. Current: 18A
Burst Current: 50A
Car Size: 1/16
Suggested Motor: Around 12T / 2030kv
Battery: 2 Cell Lipo / 4-6 Cell Ni-XX
BEC: 6V/ 1.0A Output
Motor Type: Sensorless Brushless
All Turnigy's are programmable via the digital Turnigy programming card.
Plugged this into my RC18T with a 6800KV motor and, Wow this little truck is blistering fast and does wheelies way to easy if not careful with the throttle. I did not get the programming card, but when I plugged this in, all i had adjust was my throttle trim on my radio. Very easy to set up and it provides plenty of power to my little truck.Very good esc, i use it in my lrp s18.tc with a mystery 2835n 3800kv outrunner on 2s ,great power for such a small car .. even trough the motor is a little big for the esc, it doesnt get too hot, just warm..
Programming is easy, and it has got a good punch and really strong brake. handles even big motors and high kV /pole count ones, so that you can use it very well for outrunners with high kv ratings.
Only downside is that the lipo cut off has to be programmed, default setting is disabled.
cutoff voltage can be set from2.6 to 3.4 volts in increments of 0.2v.
in fact it is the same as the EzRun 18a-SL esc, but lower price.
Great product HK!!Using this on a 1/16 size buggy. Working perfectly. On off switch could be better protected from dust/moisture.Great ESC a Must Buy it is super powerful I use with castle cm-20 5400rpm 18th scale brushless motor and it is perfect plus you can't beat the price its a 3rd cheaper than high end esc's and just as good if not Better 10 out of 10 ratingexcellent controleur, je l'utilise depuis 4 ans sur un mini t brushless en 2s et 3s
jamais aucun problemes! prix canonobousmerny regulator pro auta i lode, superI bought 2 of this ESC. I did not find it very good coz its throttle increase/decrease does not go in linear. I tried my best with its programming control but no way:-(
I would recommend to buy "Trackstar ESC instead of this one. I can compare btw both of them.Perfect ESC for my 1/18 racing cars, small, easy to setup, smooth regulation.QC failed, burned at first use, was short-circuited. On top of that my lipo blew up. I'm usually very happy with HK products but this one is not allways to be trusted.replacing full-time - 1 / 16 Brushless 4WD Monster Beatle w / 25Amp System did not notice the difference