Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Turnigy Brushless ESC 35A CAR ESC

Turnigy Brushless ESC 35A CAR ESC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
187 g
SKU:
TR35A-V2
Product
Description

The Turnigy series boasts features such as large burst currents, programmable breaking and reverse, low resistance, 2-3 Lipo cell capable and low weight.

Spec.
Cont. Current: 35A
Burst Current: 190A
Resistance: 0.0015ohm
Car Size: 1/10
Suggested Motor: Around 9T / 3650kv
Battery: 2-3 Cell Lipo / 4-9 Cell Ni-XX
BEC: 6V/ 1.5A Output
Motor Type: Sensorless Brushless
Size: 31.5*27.5*24mm
Weight: 30g

All Turnigy's are programmable via the digital Turnigy programming card.

Product
Specifications

Additional Information

  • SKU:
    TR35A-V2
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    187.00
  • Length:
    160.00
  • Width:
    50.00
  • Height
    60.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bought a couple of these, just as well, one died pretty quick, no sure why ;(,
Also noticed they have 7.2V on the side of them, this can't be right as they can handle 11.1v max, I'm pretty happy with these as my 60A Turnigy ESC lasted over two with abuse.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent ESC, have purchased many of these, only wish the fan wasn't wired the way it is requiring modification or the high voltage fan for more than 7.2v.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Levny regulator do HIMOTO
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A must !
Mounted on a mini inferno, it gives powerfull accelerations, and very smooth startups. This last point was very important to my point of view, and I'm happy with it.

The only 2 "problems":
-The battery plug was not pictured, so I was waiting XT60 or nothing; in fact it was what I think to be a Tamiyia-style. Cut and replaced by XT60.
-The fan is rated for 2S max, while I run my car on 3S, so I soldered the positive wire to the BEC, and it runs fine this way.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
QUEIDOS FRIENDS BUY A SHORT COURSE IN HobbyKing AND NOT ONLY THAT I CAME BROKEN BODY BUT ALSO COMES THE ESC 35A SET ME SOMEONE CAN EXPLAIN WHY NOVIENE how to set the manual on how HACRLO, THANKS FRIENDS hobbyists
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I now have quite a few of these for my "not so powerful" cars, and they have never let me down.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have purchased recently, is working with perfection, I have tried with a 6.5T brushless at 50pcnt and works fine. I used at full power with the 6.5T for a while and works fine as well, at the moment is not warm or hot, the batteries I've used are zippy 20C 5000mA and fine at the moment, I recommend a lot!.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Recibido hace una semana, montado en reedy neo 1 con lipos 30c y al 100pcnt de capacidad no se calienta, al menos de momento. muy recomendable pese a ser sensorless.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works very good with my 1/10 Buggy! Which exact programming card is usefull for this ESC?? I am nor sure to buy any one without any suggestions! Thanks!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put one of these with ez-run 9t and original pinion gear in a traxxas stampede. work good, but sometimes it will stop due heat.
better go this car/motor/pinon with 60a speed.
But if you dont use(or abuse) so much, its a very good speed.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.