New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy D2836/9 950KV Brushless Outrunner Motor

Turnigy D2836/9 950KV Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$14.11
Status:
In Stock
Weight:
103 g
SKU:
D2217-9-950
WANT FREE SHIPPING? Click here to find out more!
Turnigy D2836/9 950KV Brushless Outrunner Motor

Spec.
Battery: 2~4 Cell /7.4~14.8V
RPM: 950kv
Max current: 23.2A
No load current: 1A
Max power: 243W
Internal resistance: 0.070 ohm
Weight: 70g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/12x6 14.8V/9x6
Max thrust: 850g
 
  • SKU D2217-9-950
  • Brand Turnigy
  • Shipping Weight(g) 103.00
  • Length 104.00
  • Width 30.00
  • Height 55.00
  • Kv(rpm/v) 950.00
  • Max Current (A) 23.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 15.00
  • Power (W) 243.00
  • Shaft A(mm) 4.00
  • Length B (mm) 30.00
  • Diameter C(mm) 28.00
  • Can Length D(mm) 19.00
  • Total Length E(mm) 49.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Just bought one, good motor overall but came with bad solder job in the bullet conectores, one of then was really failing and the motor didn't run just trembled, re-solder all the conectores and it was fine, easy fix!

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Just bought one, good motor overall but came with bad solder job in the bullet conectores, one of then was really failing and the motor didn't run just trembled, re-solder all the conectores and it was fine, easy fix!

betreibe den Motor mit 3 S im Easy Glider 4 an einer 10x6 Klappluftschraube.
Läuft ruhig und dreht die 10x6 Aeronaut ohne Probleme. Steigflüge von 45 grad sind problemlos machbar. Guter Motor.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

betreibe den Motor mit 3 S im Easy Glider 4 an einer 10x6 Klappluftschraube.
Läuft ruhig und dreht die 10x6 Aeronaut ohne Probleme. Steigflüge von 45 grad sind problemlos machbar. Guter Motor.

Good motor. Develops around 240W on 3s spinning a 11x7 prop.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motor. Develops around 240W on 3s spinning a 11x7 prop.

comprati un paio per un bimotore, per ora funzionano bene

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

comprati un paio per un bimotore, per ora funzionano bene

pretty good motor - powerful thrust but:
prop savers are partly from poor quality and can break by just fixing a prop

good motors for F450 and F550

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

pretty good motor - powerful thrust but:
prop savers are partly from poor quality and can break by just fixing a prop

good motors for F450 and F550

Have bought these motors before. Of six, one was dead upon arrival. I like them though, and will always order more. Generally reliable.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have bought these motors before. Of six, one was dead upon arrival. I like them though, and will always order more. Generally reliable.

These Turnigy motors are of really good quality and precisely made. Highly recommended for use in Aircraft, where reliability is needed. Recommended product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These Turnigy motors are of really good quality and precisely made. Highly recommended for use in Aircraft, where reliability is needed. Recommended product.

Good motors, running on a Skymule with 9x4.7 on 4S, great !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motors, running on a Skymule with 9x4.7 on 4S, great !!!

Questionable with quality... issues with wiring material between the motor to the connectors. One of my lead wires for connection to the ESC, broke between the connection pin and the motor. Very strange, it was coated with what looked to be solder about 1/2 inch away from the pin. The wire fractured from being brittle due to the soldering material that had coated the wire, where the wire should be able to have tolerance to some flexion movements, but instead broke. Initially, I was not aware of the wire problem when the motor was acting strange, but instead thought it was an internal problem inside the motor casing, since there was lack of power and smoothness in the rotation of the motor when powered on, it was making "clunking" noises.
After repairing that wire, it runs like it should. However, it is concerning, wondering what other problems could sudden happen. I was lucky this came up when I wasn't flying. Customer service wanted me to send a video of the problem by email for proof of the motor problem. Not happy with that kind of treatment for customer service. Glad I was able to repair it, much easier than dealing with creating a video and figuring out how to send. Not exactly an easy task.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Questionable with quality... issues with wiring material between the motor to the connectors. One of my lead wires for connection to the ESC, broke between the connection pin and the motor. Very strange, it was coated with what looked to be solder about 1/2 inch away from the pin. The wire fractured from being brittle due to the soldering material that had coated the wire, where the wire should be able to have tolerance to some flexion movements, but instead broke. Initially, I was not aware of the wire problem when the motor was acting strange, but instead thought it was an internal problem inside the motor casing, since there was lack of power and smoothness in the rotation of the motor when powered on, it was making "clunking" noises.
After repairing that wire, it runs like it should. However, it is concerning, wondering what other problems could sudden happen. I was lucky this came up when I wasn't flying. Customer service wanted me to send a video of the problem by email for proof of the motor problem. Not happy with that kind of treatment for customer service. Glad I was able to repair it, much easier than dealing with creating a video and figuring out how to send. Not exactly an easy task.

Just fine for my new "dead-cat" copter setup based on the SK450 frame.

Excellent quality and quite efficient.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just fine for my new "dead-cat" copter setup based on the SK450 frame.

Excellent quality and quite efficient.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
No File Name Download [309]
D2836 OutRunner Brushless Motor Download [435]
12mm shaft end Download [185]
Prop adapter assembled Download [193]
ESC/bac Download [68]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!