Designed to be a direct swap out for your 32 size glow engine. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 32 size glow engine.
Battery: 3~4 Cell /11.1~14.8V
Max current: 60A
No load current: 11V/1.3A
Internal resistance: 0.036 ohm
Weight: 202g (not including connectors)
Diameter of shaft: 5mm
14.8v - 13x4 prop - 16.5A - 1680g Thrust
14.8v - 14x10 prop - 46A - 2350g Thrust
Suitable for sport and scale airplanes weighing 3.5 to 6 pounds (1.6–2.7kg).
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Have about 10 flights on it now with no issues. Motor runs smooth with good power.Installed this motor on a 6.9lb, 60" wing span balsa flying boat. I am using a 4000ma 4s battery and a 13x6.5 prop. Have 4 flights so far, no problems. The motor provides scale power. Using a Turnigy 60Amp speed control. Will report power data later.Fitted this to my Great planes electrostik , started with an 11 x 7 apc prop, power is only 307 watts, fitted a 12 x 10 just waiting to try it out.Fitted this to my Great planes electrostik , started with an 11 x 7 apc prop, power is only 307 watts, fitted a 12 x 10 just waiting to try it out.Fitted this to my Great planes electrostik , started with an 11 x 7 apc prop, power is only 307 watts, fitted a 12 x 10 just waiting to try it out.I put this Turnigy G32 in a 5lb. 55inch. aerobatic plane. The HK 55 slick. using 16X8 prop pulling 48 amps. on a nanotech 3300 4S 130C battery. it just purrs. No loss for power here. Great running smooth motorOrdered this motor for my Eflite Albatros 25e plane which weighs in at 7 pounds and this motor flies it with authority and comes back warm to the touch....running a 14-7 prop off a 3000mah 4 cell lipo. Excellent bargain and a great motor!powerfull engine very nice