Total Price


Cart 0 Cart 0 Loading...

Turnigy HD 2212 Brushless Gimbal Motor 100-300g (BLDC)

Generating Links

Turnigy HD 2212 Brushless Gimbal Motor 100-300g (BLDC)

Already Purchased Discontinued Product

Please continue searching for a similar product.
want FREE shipping? Click here to find out more!

Turnigy is taking the DIY out of Brushless gimbal motors, with their purpose built pre-wound Star style (delta) motors. They come in a wide range of sizes to balance power vs weight to optimize your overall setup.

Turnigy HD series gimbal motors come pre-fitted with highly flexible silicone wires, so wiring is a snap.The HD series also comes with flush mounting on both the front and back faces so any DIY to PRO projects are simple and straight forward. The HD series, it’s a perfect match to our range of brushless gimbal stabilization boards and IMUs.  

The 2212 is the perfect size for cameras around 100-300 grams.

Poles: 12N14P
KV(RPM/V): 72
Resistance: 15.6 omh
Weight: 50g
Wire: 0.15mm
Termination method: Star 
Top holes center to center: 12mm
Bottom mount: M3 19 and 16mm

  • Kv(rpm/v) 72.00
  • Max Current (Motor) (A) 0.00
  • Resistance (mh) 16.00
  • Max Voltage (V) 12.00
  • Power (W) 0.00
  • Shaft A(mm) 5.00
  • Length B (mm) 28.00
  • Can Diameter C(mm) 27.00
  • Can Length D(mm) 15.00
  • Total Length E(mm) 28.00

Dimension Diagram Guide

  • attributeset-10


  • Turnigy HD Brushless Gimbal Motors
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Dangaras | Verified Buyer

  • Overall
  • Value
  • Quality

Gimbal motors are 4/5

May 31, 2019

Ordered 3 f these for a 2 axis gimbal. The yaw motor is operating as expected but the pitch motor is unable to control the direction suitably.
Changed the pitch motor to the spare 3rd motor & it still operated unsuitably. Noticed that the perfect 0 degree pitch position was right in the middle of 2 motor pole positions. This was probably part of the reason it could never settle cleanly.
The Gimbal controller has the ability to detect and set the number of poles which agreed with the posted specs of 14. No matter how the PID settings are adjusted or the motor power is set the pitch will not stabilize.
Could be a defective gimbal sensor. Will proceed to test.

Gavin | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 25, 2015

Great quality. I did get 2 different motors when I ordered 2 of them. It was just cosmetic, the one had a shiny finish and the other had a matte finish. If you are building a gimbal, I would buy these again.

Hilbert | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 17, 2015

Bought these motors for a StormBGC32 gimbal and they work great, as the video stated lower resistance of the motors will cause "stutter" .

Mike | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 12, 2015

Great little motor. Used it on my roll axis to replace the garbage motors that came with my original gimbal kit (not form Hobby King). More than strong enough for use with GoPro or Sony action cam sized cameras.

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Oct 27, 2014

great for the yaw axis on a gopro 3 axis gimbal

ad_wing | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 09, 2014

Equipa muito bem a "Brushless Camera Gimbal Stabilization Control Board" e a cmara "1/3-inch SONY CCD Video Camera", Muito muito fivel e estvel.

Customer files
No File Name Download [1811]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!