New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

TURNIGY K-Force 60A Brushless ESC

TURNIGY K-Force 60A Brushless ESC

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
Weight:
107 g
SKU:
KF-60A
WANT FREE SHIPPING? Click here to find out more!
The Turnigy K-Force series are based on an all new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup.
 
Specification: 
Output:  Continuous 60A, burst 90A up to 10 seconds.
Input Voltage:  2-6 cells lithium battery or 5-18 cells NIMH battery.  
BEC:  Switching mode DC-DC regulator.  3A@5.25V or 3A@6V switchable by user progromming.
Control Signal Transmission: Optically coupled system.
Max Speed:    
   2 Pole: 210,000rpm
   6 Pole: 70,000rpm
   12 Pole: 35,000rpm
Size:  70mm (L) * 34mm (W) * 16mm (H).
Weight:  68g.
 
 
Features:
*High performance microprocessor (24khz) brings out the best compatibility with all kinds of motors and the highest driving efficiency.
*Wide-open heatsink design to get the best heat dissipation effect.
*Improved Normal, Soft, Very-Soft start modes, compatible with aircraft and helicopter.
*Smooth, linear, quick and precise throttle response.
*Throttle signal transfered through optically coupled system to avoid the electromagnetic interference.
*Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
*Governor mode for helicopter. 
*The firmware of the ESC can be updated through the USB adapter.
*User programmable via Tx, Programming card or pc USB port. .
 
*Not compatible with non 'K-Force' esc programming card.
  • SKU KF-60A
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight(g) 107.00
  • Length 0.00
  • Width 0.00
  • Height 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Looks very nice and it is working perfectly with 2in1 ESC programer I love it. I didnt test full load yet, but shot test with 30A load on bech was OK. I has nice design but would be nice if AC cabel were black, red, yelow(blue) And very nice price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks very nice and it is working perfectly with 2in1 ESC programer I love it. I didnt test full load yet, but shot test with 30A load on bech was OK. I has nice design but would be nice if AC cabel were black, red, yelow(blue) And very nice price.

Ok test flight 1, Bec 6V strong enough,

the power not much different from align 35

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok test flight 1, Bec 6V strong enough,

the power not much different from align 35

Held up to 70 and 80A bursts on 4S for 20 seconds and came back warm, but not hot. The new K-force ESC's are definitely higher quality than the standard turnigy packs

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Held up to 70 and 80A bursts on 4S for 20 seconds and came back warm, but not hot. The new K-force ESC's are definitely higher quality than the standard turnigy packs

No problem with the planes though, they are less demanding. Very good "super soft" start (I used some Plush 60A and I liked them due to switched BEC etc. But I definitely did not like their "soft" start.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No problem with the planes though, they are less demanding. Very good "super soft" start (I used some Plush 60A and I liked them due to switched BEC etc. But I definitely did not like their "soft" start.

juz gt it, look good and work great. the esc had a hard casing, tt a bonus.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

juz gt it, look good and work great. the esc had a hard casing, tt a bonus.

This is a perfect ESC for a 500 size heli. But 3A BEC does not provide sufficient power for the heli servos.

No problem with the planes though, they are less demanding.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a perfect ESC for a 500 size heli. But 3A BEC does not provide sufficient power for the heli servos.

No problem with the planes though, they are less demanding.

Review is based on a Hobbywing Platinum 60A (identical to K-Force 60A) used in a KDS500 II with stock motor with 6s lipos.



Very good "super soft" start (I used some Plush 60A and I liked them due to switched BEC etc. But I definitely did not like their "soft" start.



The governor works. But you have to know the number of magnetic poles of you motor (for timing as well).



Very easy programming with the 2in1 box.



Best price at HobbyKing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Review is based on a Hobbywing Platinum 60A (identical to K-Force 60A) used in a KDS500 II with stock motor with 6s lipos.



Very good "super soft" start (I used some Plush 60A and I liked them due to switched BEC etc. But I definitely did not like their "soft" start.



The governor works. But you have to know the number of magnetic poles of you motor (for timing as well).



Very easy programming with the 2in1 box.



Best price at HobbyKing.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!