This little device connects to your lipos JST balance plug and will tell you the status of each cell in your pack.
Its dead easy to use, so easy in fact there is no need for a further description. Just take a look at the image!
A great product for anyone who has ever taken off with a half dead pack or wondering if their pack is balanced or not whilst at the field.
Unlike other digital displays, this can be perminently installed in your plane or heli.
Works with 3S lipoly packs as well as 4S
Suitable for all JST-XH (JST) balance connector batteries.
Zippy (all versions)
I bought this article for a friend, but I prefer another one that give you the voltage of each cell.Works perfectly. Wires could be protected from strain (accidental pulling) better, but I've had no issues.Bastante sencillo indicardor de bateria se puede colocar onboard es bastante ligero aunque no tan pequeno de tamano, tiene bastante extencion de clable y ademas lo recomiendo puesto que no ocupa un canal del RX ya que se conecta directo a la bateria...
Otra cosa pero poco en contra son las tonalidades de color entre los porcentajes de 21-50 51-90 ya que son muy parecidas no es visible a simple vista!!!Muy buen indicador para baterias, perfecto para colocarlo abordo de nuestro modelos, trae bastante cable de extencion... trae su propio cinta adhesiva atras para colocarlo.Must have tool!!! Works great!! I'm new to the hobby but easy to use!!Like most of us I found that of the two I ordered one was correctly wired and one was backwards.. So make sure you check how yours are wired before trying them out.. Not a big deal to pull the wires with pins out of the plastic and put them in correctly but watch out as they are not soldered on very good I had two connection fail and had to re soldered them.. After checking then but some CA glue on to help hold everything together...
Other than that they seem to work just fine.. So 4 starts lost one for poor workmanship..ottimo prodotto a basso prezzoNice enough but the first thing to do is sneak a little ca in the plug to lock the pins then silicone around the shrink tubing to help stress relieve the connectors. My #2 cell green indicator went out after the first pack I tried.Peu d'utilit part peut-tre pour mettre dans un modle ::the leds dont excenge color