Tired of carrying two chargers to the field? Need serious charging power without the hassle of multiple chargers? Then the Turnigy Mega 200Wx2 is the charger you have been waiting for!
This charger features dual 200w outputs, that’s 400w of total charging power! Each output is independent and 2 JST-XH balance boards have been included for balancing Li-XX batteries. A temperature sensor has also been included for monitoring battery temperature during the charge process.
Just for something a little different a 5v/1A USB power output has been included, you can use this power output to charge phones or power any USB compatible device.
Charging Output: 2 x 200w (400w Total)
Input voltage: 12~18v DC (500 Watt minimum)
Charge Current Range: 0.1~10.0A
Discharge Current: 0.1~5.0A
Discharge power: 25watt
Balance Current Drain: 200mAh/cell
Li-XX Cell Count: 1~6s
Ni-XX Cell Count: 1~18s
Pb battery voltage: 2~24v
Battery setup memories: 10
Intelligent temp control: Yes
PC Link: Mini USB
Cooling: Dual Fan
USB Power supply: 5v/1A
2 x JST-XH Balance boards
1 x Alligator clip charge lead
2 x 4mm Bullet connector pig tails (Custom fit your own connectors)
* Note: User manual and software available under the files tab. This is the improved V2 version of the Turnigy Mega 200Wx2.
This was a really great charger. Worked flawlessly for a long time, then while charging two 6S batteries at the max rate, stopped working and reported "INPUT VOLTAGE ERROR." I unplugged it and reapplied power, now only one of the charging circuits works... Not sure what can be done to fix it, charging port one always says "CONNECTION BREAK" when I try to charge a battery. Any ideas to fix please comment. I wish I could give this 5 stars, but low input voltage shouldn't fry a charging circuit.puissant, il charge tous les accus pour les voitures brushless. le seul petit dfaut, c'est qu'il est lgrement bruyant. C'est un trs bon rapport qualit prix.
Good dealThis charger has to be the best bang for your buck. I just received mine and love it. This is now the V2 and fans are quite. No louder then my other chargers. I thought it was just 2 charging ports to charge 2 of the same spec batteries BUT it is in fact 2 chargers in one which you switch the display info from one port to the other.
Well done H/K on yet another fine product that's well priced for everyone......Awesome charger. Have had no problems.Very impressed. Charges max 6s at 8.4Amps per side. I tend to charge in parallel so I put 6s 10,000Mah packs on each side and charge in a little over an hour.
For individual packs it's much faster of course. And accurate too. It's fairly noisy but no more so than my other lipo chargers.This charger is highly recommended. I bought this with the HobbyKing 30 amp power supply, great combination.
Like any new (and up to date) device, read the manual and get used to the functions before you use it. I downloaded the manual from the "Global" purchase area from the files tab. It does not show up in the "United States" section (no big deal).
This charger is accurate, fast, and can be a little difficult to use for some, but after careful review of the manual actually makes it easy to use.
The burn-in smell only lasts a short while and eventually goes away, do not worry. And if a guy who paid four times as much for his charger complains about the fan noise, tell him this will last longer since it runs cooler.This charger is rubbish. I bought this charger with high hopes of being able to charge 2 batteries at a time. Firts time i charged a battery 6s 5000mah 70c at 10amps it blow up. The charger is basicly 2 chargers in one and one side still worked. I needed the charger so didnt return it and carried on using one side. I charged another different 6s 5000mah lipo but at 7amps to give it a chance and again same fault. Charger appeared to working fine. the fan was running but after about 10 minutes the same fault came up, (connection break). now it wont charge anything. i took it apart and the transistors are blown. replaced these with correct transistors but there are further faults down the line. This is a very poor quality charger not fit for purpose.
Looks nice, dosnt work better off setting fire to your money.The battery charger makes good his job.
Test with 2x5000mAh / 6S Lipo, charging current was 2x5A,
The Balancher-Voltage drift only unimportant,
for Price of the loader satisfactory.
I think the price should be lower than two single units. I miss large screen of 8150 charger too. That said, it does work, is fast charging, but have yet to get passed 2A discharge. Also, while it will alert if you don't have main charging leads connected or if they come loose, it does NOT alert you if you mistakenly set say a 3S battery to charge at 4S or higher. It just Does it. All this gadgetry and it can't tell it's charging wrong battery.good charger, but would have been nice to get a few common battery plug/adapters with it -1 star for that
Manual download now [1749kb] No File Name download now [1749kb] burned componet download now [27kb] burned componet download now [27kb] burned componet download now [27kb] Manual download now [1749kb] LogView ptbr download now [0kb] super easy fan noise mod download now [229kb]