MultiStar ESCs are are a quality speed controller at a fantastic price! Designed for simple installation and easy setup these ESCs have proven to offer excellent performance when used in Multi-rotor applications. If your starting out in Multi-rotors and need an easy to install solution that is tested and proven to work with Multi-rotor craft then these speed controllers have you covered.
These ESC's features a very smooth yet linear throttle response, without sacrificing a rapid, crisp, response to any throttle input. Safety is not forgotten with all Multistar Esc's featuring adjustable battery LVC (set battery type to LiXX to disable LVC), stalled motor (overload) protection, signal loss shut-down and safe arming.
All Multistar series ESC's come with bullet connectors installed that are suited to the ESC's rated power handling. This allows for plug and play convenience by simply adding the appropriate battery supply splitter (3,4 or 6 ESC) and motor lead extensions from the Multistar modular accessory line. What could be simpler?
All Multistar ESC's feature an ATmega MCU that opens the door to customizable firmware - for those so inclined! or alternatively a programming card can be used with the installed software for quick and easy setup with the pre-flashed software.
Please refer to the related items below for a solder free multi-rotor power solution to suit your next multi-rotor project.
• Smooth and linear throttle control
• Fast response to throttle input
• Atel MCU
• Stalled motor protection
• Throttle signal lose protection
• Safe power-on (throttle lockout)
• Support 480Hz+ high refresh rates (up to 499hz)
• Compatible with programming card
Constant Current: 45A
Input Voltage: 2-6 cells Lipoly
BEC: Yes (Switching)
PWM: 8 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 50mm x 30mm
Discharge Plugs: Male 4.0mm Bullet Connector
Motor Plugs: Female 4.0mm Bullet Connector
User manual now available for download under "Files" tab.
Perfect ESC for bigger motors!
Works like charm and no heating issue...
Its very easy easy to setup these devices and I am getting over 23 minutes of mixed flight time with zero heating issue!wish these came with 3.5mm bullets instead of the 4mm so they can match all the motors I use that need these to run 6sGood reliable speed with life-po4 option which is really cool. the programing card is easy to use as well.I bought 4 of these, one which was bad, however HobbyKings RMA services fixed this problem in less than a week and sent me a new ESC. As far as i am concerned these things work very well with my quad. I have no problems
Received 6 for a Tarot T810 (will disable 5 SBEC's). Although smoother in start up and control than all my fixed wing controllers I flashed them with SimonK firmware and now they're all super smooth/responsive! Used KK flash tool (Downloaded from internet). a USBASP from eBay (HK was BK at the time), an Atmel Atmega socket firmware flashing tool from HK. Selected "dlu40a" as firmware in KK flashing programme screen. and pressed GO!!Nice esc quality, will power my 420 kv multistar motorI've got these esc's instaledl on my 640mm DIY hexacopter. I used the multistar programming card to program the esc's, using stock firmware. I've been flying these on my hex for about 4 weeks now, upgraded from turnigy plush 30amp esc's.Excellent multi rotor brushless ESC's. I use them with 35-36 NTM 910 kv motors and I have not been dissapointed with their performance. Works extremely well paired with the multiwii 328P FC and when doing rapid descents performs better than the turnigy plush series ESC's. Will continue to buy these till something better comes out. (Have not seen a need nor have i had the desire to flash them however with purchase of the flashing tool it appears that the process would be very simple.So good ! It blew the mind of my brushless motor !This ESC are very good for this money.