Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy Multistar BLheli_32 ARM 33A 3g Race Spec ESC 2~5S (OPTO)

Generating Links

Turnigy Multistar BLheli_32 ARM 33A 3g Race Spec ESC 2~5S (OPTO)

Price:

Now save save $0.00 $0.00

$12.35
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9351000099-0
want FREE shipping? Click here to find out more!

The Turnigy MultiStar BLheli_32 ARM ESCs are very light, compact, super simple to install and have a very easy setup process. If you're looking for an edge against the competition and take your FPV drone racing seriously then the Turnigy MultiStar BLheli_32 ARM ESCs are worth taking a closer look at.


Turnigy MultiStar BLheli_32 ARM ESCs feature a proprietary firmware (rumored to have been developed in DrEvils Lab!!) that delivers a smooth linear throttle response, without sacrificing a rapid, crisp response to your throttle inputs.


Each ESC has plated connections to allow you to easily solder your motor wires directly to the PCB and then add your preferred connector to the pre-tinned power cables. With their small lightweight design these ESC's will have you racing fast and at a very affordable price. 


Features:
• Lightweight (3g)
• Smooth and linear throttle control
• Fast response to throttle input
• Arm Cortex-M0 MCU
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)
• Supports 480Hz high refresh rates
• Programmable


Specs:
Constant Current: 33A
Cells: 2~5S
Input Voltage: 8.4v ~ 21v
BEC: None (opto only)
MCU: Arm Cortex-M0
Timing: Auto
Frequency: 48Mhz
Programmable: Yes (with Multistar program card)
PCB Size: 29 x 16 x 5mm
Weight: 3g

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Pablo | Verified Buyer

  • Overall
  • Quality
  • Value

Very Bad

Mar 03, 2021

Very Bad I buy 7 and 2 don't works, one short cut and another don't drive motor

Dutchfpv | Verified Buyer

  • Overall
  • Quality
  • Value

Perfect in a s1100

Feb 10, 2021

They work great and easy to setup with blheli in pas through mode with a matek board. So you dont need the multistar program card! Add some heatsinks because i use 2 of them in a Harrier s1100 flying wing.

Valev | Verified Buyer

  • Overall
  • Quality
  • Value

Good

Jan 21, 2021

Very good ESC, I use on fixed wing

Laurent | Verified Buyer

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use it as a replacement part for my blade 230s (tail motor only) as it is way cheaper than the stock ESC. I just had to adapt the PID parameters of the receiver. In the end, it goes better than the stock part (very good tail behavior). It is very light and small so that I could place it in the original location.

Laurent | Verified Buyer

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use it as a replacement part for my blade 230s (tail motor only) as it is way cheaper than the stock ESC. I just had to adapt the PID parameters of the receiver. In the end, it goes better than the stock part (very good tail behavior). It is very light and small so that I could place it in the original location.

Laurent | Verified Buyer

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use it as a replacement part for my blade 230s (tail motor only) as it is way cheaper than the stock ESC. I just had to adapt the PID parameters of the receiver. In the end, it goes better than the stock part (very good tail behavior). It is very light and small so that I could place it in the original location.

Laurent | Verified Buyer

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use this ESC as a replacement part in my Blade 230S for the tail motor (it is way cheaper than the stock part). It works very well and it is very light. I just had to modify the PID parameters of the receiver. It is quite small so that it can be placed in the original location. My heli flies as well as with the stock part.

Abu Bakar | Verified Buyer

  • Overall
  • Quality
  • Value

Awsome mini esc

Sep 15, 2018

Have this attach with racestar 2506 2700kv, on my own build wing. Use 3s 1550mah/4s 1000mah. Auw just below 500mg. Flight time on both batteries almost 10min mostly 50 to 60 percent throttle.

Customer files
turnigy-multistar-esc-manual.pdf Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!