Boost the performance of your machine with this 1S 300mAh 35-70C high power Lipo!
The Turnigy nano-tech round single series cells are the perfect solution for many applications where space and weight are at a premium. These round Lipoly cells can be soldered together to make custom packs to suit your needs.
More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilizing an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
This particular battery has a 2-pin Molex connector. Please refer to the attached image as this Battery has the "B" plug polarity. Please make sure this battery suites your connection. The wrong polarity will damage your electronics.
Voltage: 1s / 3.7V
Discharge: 45C Constant / 90C Burst
Weight: 9g (Including plug & case)
Dimensions: 43mm x 17 x 6mm
Balance Plug: N/A
Discharge Plug: 2pin Molex Connector
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity. These additives create the ability for imbibition in the carrier liquid to supply more ion channels.
This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
I've used these in an H8 mini and an Eachine E010. Both frames require a little cutting work to accommodate this larger battery. Flight performance is great. They tend to get a bit hot in the fpv mini quad, but with no ill effects. I was worried when one puffed from being over discharged, but after a couple of cycles, its back to its old power, so very happy. But at this price, it wouldn't really matter.I've used these in an H8 mini and an Eachine E010. Both frames require a little cutting work to accommodate this larger battery. Flight performance is great. They tend to get a bit hot in the fpv mini quad, but with no ill effects. I was worried when one puffed from being over discharged, but after a couple of cycles, its back to its old power, so very happy. But at this price, it wouldn't really matter.I use this battery in my brushless super cp, just had the first flight with it and was surprised by the power this little battery contains.After a week of having them, and only around 5 cycles a battery they are all cactus. They volt sag with any current draw so are useless in my miniwhoop now :/
Will be ordering more now I got new chargers in case it was the new chargers I had with the latest quad...Reallly good battery, better than standards one. A lot of punch for my diy quads!Bought 2 of these for my B17 Bomber
Can get a good 8-9 min flight time with good full throttle bursts, power doesn't drop off as quickly as the standard lipo suppliedCheap, light, high power rating, very happy with these.
I ordered six, all measured around 1.85V.
I charge them at 5C, with only 2.5C temperature rise, perfect!Leider habe ich diese Ajkkus gewhlt. Lieferzeit war ok. Aber beim ersten Laden schon aufgeblht, also Mll und ab zur Entsorgung.
First time charging the lipos blow up. My money is dust in the wind. no more everExcellent batteries for any helicopter that use 1S ones, mine is the Wltoys v977 and fits perfect in the battery tray. Last about 3,5 minutes and they are very powerful.I use these on my WLToys V977 and they're are actually really good value and give plenty of punch. They are slightly more powerful than stock but are a LOT lighter meaning a bit less flight time but still good for 4 mins of 3D.