More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those who love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!!
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 45C Constant / 90C Burst
Weight: 19g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: JST
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
These are the batteries for indoor planes. No doubt about it. They last ages.Perfect batteries for indoor. I have bought more than 12 so far an they are like new.I'm using these on my Emax Babyhawk and so far, I have not been able to find anything that would be better. I'm getting around 4 - 4.5 minutes of flight time and the price is great, compared to others.I got these for a depron mini 3d plane. They are working better than I expected and I'm getting 5 minute + flight times. Very happy.I also got these for my babyhawk and was impressed to say the least. 3 mins of hard flying and not even warm.I got some of these for my Emax Baby Hawk, they are noticeably better than the 'standard' 300mah 35c bats I bought with it. Much more go juice.Gewicht 17,7g
43,3 x 16,8 x 12,3 mm
Ballancerkabel 2,5cm inkl Stecker
Akkukabel 6cm inkl SteckerVery nice small lipo. I use it to power my FTP gear on hexacopter independently. It's enought for a quite few flights so no regret. I can recommend it easly.This battery fits Assault 100 aka HCP100s, it is small and has great power, but wires with connector are easy to pull out from pack, and you can throw your battery in trash.
2 out of 4 my batteries have broken wires, yes it is my fault, but positive connector wire isnt glued good enough in pack.Good Lipo for outdoor shocky ;) c-rate a bit too high