More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 25C Constant / 40C Burst
Weight: 39g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: Mini-JST Connector
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
Nice little battery. Actual capacity is 420 mah for mine. Gives almost one hour of FPV screen receiver transmitter. Nice!Excellent lipo battery flying with a 9amp draw and little to no heat. After 23 flights cells greatest difference in cell voltage after flight is .02 Fantasticawesome battery, great power for such a small size, will getting more in the future, using on a scratch foamie 3D build, very nicely packed for shipping as wellnickel pour alimenter mon nouveau recepteur video quanum 400mwelle arrive un peu gonflgreat battery !!!!! usin in my losi micro truggyNice and good little battery. Fly them in my 3s Blade 130x heli. 3 1/2 min flightime without problems. Cant say much about durability so far.Perfect Perfect Perfect! Nano-Techs all day longI use this size battery in my Multiplex Merlin , the flight duration is nearly as good as another make 1000 ma but the vertices climb with this battery is awesome . Straight out of my hand it goes up like a rocket. It's so much lighter than the bigger battery yet gives much better performance. It's almost light enough to stay up on lift from trees on a windy day. Flight times ca n approach 30 mins if full throttle isn't used too much.A very good battery manufacturing. Work well. I use it to power my additional system FPV. Weight with connector, 38g. Conform with website description.