Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy nano-tech 4500mah 3S 35~70C Lipo Pack

Generating Links

Turnigy nano-tech 4500mah 3S 35~70C Lipo Pack

Price:

Now save save $0.00 $0.00

$50.84

This item is no longer available.
Updated or similar products shown below:

Turnigy nano-tech 4500mAh 3S 35~70C Lipo Pack w/XT-90

  • Status:
    In Stock
    SKU:
    9210000219-0

    Now save save $7.19 $7.19

    Special Price $28.80 $28.80

    You save save $7.19 $7.19

    Was  $35.99

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
N4500.3S.35
want FREE shipping? Click here to find out more!

More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! 

Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance! 

Spec.
Capacity: 4500mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 35C Constant / 70C Burst
Weight: 372g (including wire, plug & case)
Dimensions: 151x49x23mm
Balance Plug: JST-XH
Discharge Plug: 4mm Bullet-connector 

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

  • Capacity (mAh) 4500.00
  • Discharge(c) 35.00
  • Max Charge Rate(C) 8.00
  • Length-A(mm) 151.00
  • Height-B(mm) 49.00
  • Width-C(mm) 23.00
attributeset-12
Close

Dimension Diagram Guide

  • attributeset-12

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 07, 2016

This battery is no joke. I use it on a 450 quad with a FPV camera and receiver. ESC's are 30 AMP EMax and motors are 935K Emax as well. Get about 15-20 minutes or so of run time depending on how hard it's pushed. Bought another today for a spare.

Pedro | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 09, 2015

I purchase 2 packs "recently"

The first lasted somewhere between 15 to 20 cycles, one cell is dead and don't hold capacity

Second one, took 7 months to arrive and all cells are DOA and the pack became very puff, waiting for my replacement to arrive, lets hope to have better lucky, but i wouldn't recommend the nano-techs's, lots of reports on the web of people having the very same problem

maybe i'm just unlucky...

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 26, 2014

i use this pack for my turnigy talon tricopter and it extends my flight time well over 10 min. im running 1200kv motors with 8x4.7 props and it flies great.

DutchCopter | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 23, 2014

In use on a hexacopter. The cells are well matched and the capacity is as stated. It's a reliable battery which easily delivers the high peak currents without any problems.

Adam | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 23, 2013

Great battery's and good price , I have two of them lots of power and I'm getting
Amazing fly times on them . I would buy them again for sure

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 21, 2013

very good battery, holds the charge very well, capacity on several charge/discharge ~ 4750MAh

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 21, 2013

very good battery, holds the charge very well, does not heat, capacity on several charge/discharge ~ 4750MAh

TobbenLog | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 23, 2013

I have 6 of these batteries using them on hpi vorza flux with 2650kv motor. 2 times 12,6 volt = 25,2 volts. the car is doing 120 kph. got lots of power with these batteries. Turnigy is the thing if you want quality!!!
I always buy Turnigy.

Oakstone | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 14, 2013

This battery fits perfectly into the stock battery box for the 1/10 Traxxas Slash 4x4.

I've swapped the connector for an XT-60. The 10AWG wiring is a little big for the solder cups on the XT-60, but with lots of solder and some patience you can get it on very securely. I also used heat shrink and electrical tape to ensure the connection stays solid and dry.

Marcin | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 03, 2012

Dont know what to say.

First time in my life that was happened to me :

https://lh5.googleusercontent.com/-PFUae2En7rU/UEMzsw9KRbI/AAAAAAAAe2s/y5s9Anoxd8s/s800/IMG_1869.JPG

https://lh6.googleusercontent.com/-NghT8IJYlPs/UEM0I_9L9_I/AAAAAAAAe3I/kOfthORCrNg/s800/IMG_1870.JPG

Used this battery more than 10x , and other batteries more than 2 years and still working.
This one was crap or ...
Im not sure if HK can do refund ???

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!