Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Turnigy nano-tech 5000mah 1S2P 50~100C Hardcase Lipo Pack (ROAR APPROVED)

Turnigy nano-tech 5000mah 1S2P 50~100C Hardcase Lipo Pack (ROAR APPROVED)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
210 g
SKU:
NC5000.1S2P.50

Combine

essential items and
acc
Product
Description

Now officialy approved by ROAR for race use!

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.

In short, less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.

Unfortunately with other big brands, numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!

Spec.
Capacity: 5000mAh
Voltage: 1S2P / 1S Cell / 3.7V
Discharge: 50C Constant / 100C Burst
Weight: 148g (including wire & case)
Dimensions: 93.2x47x18.5mm
Balance Plug: NIL
Discharge Plug: 4mm Bullet-connector to your own custom plug
Model no: NC5000.1S2P.50

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity. These additives create the ability for imbibition in the carrier liquid to supply more ion channels.

This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

Product
Specifications

Additional Information

  • SKU:
    NC5000.1S2P.50
  • Brand:
    Turnigy
  • Shipping Weight(g)
    210.00
  • Length
    93.00
  • Width:
    18.00
  • Height:
    47.00
  • Capacity (mAh)
    5000.00
  • Discharge(c)
    50.00
  • Length-A(mm):
    93.00
  • Height-B(mm):
    47.00
  • Width-C(mm)
    19.00
  • Unit Weight (g)
    148
  • Max Charge Rate(C):
    8.00
  • Discharge Plug:
    No
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great little packs. Quality wires.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect for gt-10x pan car. Comes with two strong wires, red and black, without a charger conector, so you have to solder one. No need to have a balance plug because is just one cell battery.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Love this battery pack. Good punch to it. Ran for a whole season of oval racing and still running strong. I dislike the "birdcage" bullets since they then to lose grip over time (I prefer the other kind), but so far so good. I do like that the wires are replaceable and ready to accept my own connector type. Good price for a good pack. Highly recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very well assembled battery. The fit and finish are tight and clean. The graphics are attractive. The included wire leads are 12Ga with pre-soldered 4mm bullets on one end. I will be using this battery to power the glow driver on my five cylinder radial engine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received mine today.. fit and finish were terrific. Great solid case, bullets that I can just wire right in if I want. I am using this in a 1/12 pan car, so I will take the bullets to 16g wire - but the point is.. for the money.. these batteries are great. 14days to Canada btw :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Couldn't you offer a LPo with the 1/12 size in ar hard case with 2s. A lot of hobby drivers hate to drive there Pans with 1s, due to the expensive ESC, Motors...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Battery. I race it in 1/10 WGT with many A main results. I also run 8 min in 1/12 13.5 and lap times are consistent to the end with very little drop off. I highly recommend and a great price as well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gr8 battery bought 3 for my zenoah ignition & fuel pump on a full charge I get around 3-4 flight of 8 mins each fuelpump now fill at a super fast rate that I cant handle so I charge it for long storage & it fine now.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.