Country
United States
 
Shipped From:
  • Global

Turnigy Reaktor Pro 350W 23A Power Supply (100~240V AC)

Turnigy Reaktor Pro 350W 23A Pow...

Serious power for your charger!

The Turnigy Reaktor Pro 350W 23A power supply was designed with simplicity in mind and to provide a stable, smooth voltage output to your charger (15~15.5V DC.) It has an efficiency of greater than 90%....
9466000005-0

Now save save $0.00 $0

$53.79
1240g
9466000005-0


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

Serious power for your charger!

The Turnigy Reaktor Pro 350W 23A power supply was designed with simplicity in mind and to provide a stable, smooth voltage output to your charger (15~15.5V DC.) It has an efficiency of greater than 90%.

The Reaktor Pro 350W power supply has a built in fan for effective cooling and features over current and temperature protection.

Features:
• Overload protection
• Over temperature protection
• Short circuit protection
• Up to 350W output
• Better than 90% efficiency
• Built in cooling fan

Specs:
Input voltage: 100~240V AC
Input frequency: 50~60Hz
Output voltage: 15~15.5V DC
Output current: 35A
Output Watts: 350W
Dimensions 185 x 88 x 47mm
Weight: 680g

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Torque(kg)(min. 0.01kg)
    No
  • Diameter X(Inch)
    No
  • A(mm):
    No
  • B(mm):
    No
  • C(mm)
    No
  • D(mm)
    No
  • E(mm):
    No
  • F(mm):
    No
  • SKU
    9466000005-0
  • Weight(g)
    1240.00
  • Length:
    220.00
  • Width:
    120.00
  • Height
    160.00
  • Kv(rpm/v)
    1000.00
  • Max Currents (A):
    35.00
  • Power (W):
    500.00
  • Length B (mm)
    33.00
  • Can Length D(mm)
    13.00
  • Max Voltage(V):
    12.00
  • Shaft A(mm):
    4.00
  • Unit Weight (g)
    115
  • Diameter C(mm)
    41.00
  • Total Length E(mm):
    66.00
  • Resistance (mh):
    0.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

I would recommend you to open it and see if the heat sink plate is tightended well, in my caase it wasn't. the capacitor is cheap 85 deg version and not the 105 deg version. I did charge it in max draw, capacitor didnt heat up much. i guess it will hold. will it do so in summers when it is all enclosed ? I dunno, need to wait and watch.

For the price, it is definetely worth it, will it last a lifetime? i doubt it
Great power supply. Provides very stable and high current to my reaktor 300w while charging a 6S lipo at 250w. Gets barely warm. High quality aluminium. Very good for the price, highly recommended.

Weighs around 650g by itself.
Use it with my QUATTRO Hobbyking charger. Works great!
totally silent, runs the reactor charger no problem. bright blue LED when its on. came with a US plug kettle cord
This is a powerful powersupply and goes well with the 300w reaktor charger.
This charger can draw approx 21A from the source supply. At 12V input, it'll draw approx 250 watts. Given minimum 90pcnt efficiency, it'll charge at over 230 watts with12V source supply. I like it a lot. Make some noise but barely noticeable. Runs warm.
Ideal setup : reaktor 350w powersupply, 300w charger, parallel charging board and you are good to go:)
Dropped a crown because for the price, you can always go for cheap power source (server power source for example) but for the avid and in-a-hurry-to-fly hobbyist, its good!
Video
Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.