New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy TGY-50700M Low Profile High Torque Mechanical Retract Servo

Turnigy TGY-50700M Low Profile High Torque Mechanical Retract Servo

Discontinued Product

Please continue searching for a similar product.
SKU:
9397000002
WANT FREE SHIPPING? Click here to find out more!

Turnigy low profile, high torque (7kg.cm) landing gear servo for mechanical retactable gear.

Specs:
Voltage: 4.8V ~ 6.0V
Speed:  0.30 sec/60deg (4.8v) 0.28sec/deg (6.0v)
Torque: 7kg.cm (4.8v) 7.5kg.cm (6.0v)
Size: 44mmX23mmX24mm
Weight: 30g
Motor:  Brushed
Gear Train: Metal/plastic
Ball Bearing: No
Type: Analogue

  • SKU 9397000002
  • Brand -
  • Shipping Weight 51.0000
  • Length 65.00
  • Width 40.00
  • Height 40.00
  • Torque(kg)(min. 0.01kg) 7.00
  • Speed (Sec/60deg) 0.30
  • A(mm) 28.00
  • B(mm) 44.00
  • C(mm) 24.00
  • D(mm) 23.00
  • E(mm) 55.00
  • F(mm) 15.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great for landing gears

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great for landing gears

I put this servo on mechanical retracts 60 size plane striped the plastic splines within three operations, so don't put any pressure on them '7kg don't think so'

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put this servo on mechanical retracts 60 size plane striped the plastic splines within three operations, so don't put any pressure on them '7kg don't think so'

Bought this for my FPV antenna tracker. Supplied dimensions are correct. Height with arm attached is 31mm. This is a proportional servo, not a "bang-bang" type. The most I could get from it is about 170 degree sweep using a servo tester (it would hit an internal stop at one end, so be sure to check for binding when setting up). Speed is about 1.75 sec from end to end, and it slows as it approaches the set position. It has a pair of yellow metal bushes on the output shaft, which can be swapped-out for bearings if you have a suitable donor servo - I used the bearings from a Hextronic HX5010. Has plenty of torque and my sample runs quite smooth.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this for my FPV antenna tracker. Supplied dimensions are correct. Height with arm attached is 31mm. This is a proportional servo, not a "bang-bang" type. The most I could get from it is about 170 degree sweep using a servo tester (it would hit an internal stop at one end, so be sure to check for binding when setting up). Speed is about 1.75 sec from end to end, and it slows as it approaches the set position. It has a pair of yellow metal bushes on the output shaft, which can be swapped-out for bearings if you have a suitable donor servo - I used the bearings from a Hextronic HX5010. Has plenty of torque and my sample runs quite smooth.

best servo for pan-tilt fpv:
- low speed perfect reduce jitter from hedtracker
- strenght
- low profile
- high torque
this product must be in FPV section!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

best servo for pan-tilt fpv:
- low speed perfect reduce jitter from hedtracker
- strenght
- low profile
- high torque
this product must be in FPV section!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!