Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller
Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller
Copy and Share the Below URL
The Turnigy TY-P1 25Amp ESC is a stand out performer. Using quality IR HEXFET® Power MOSFETs developed in the USA, this ESC is cable of handling current draw in excess of 40 amps. However this in house designed ESC was developed and produced by the HobbyKing engineering team with one goal in mind, quality and reliability. Rather than over rate the ESC and push it to the limit with a larger heat-sink, as many companies do, we wanted to design a Speed controller for those looking for a bullet proof solution. We use SMT technology rather than hand soldering to produce consistent quality and reliability each and every time. The TY-P1 25A ESC also features independent voltage regulators (One for the BEC and one for the MCU) this ensures the MCU will remain powered in the event of a high momentary amp draw from the BEC circuit and vise versa. An XT-60 battery connector and 3.5mm bullet connectors have been pre-soldered for convenience.
Specs:
Cont. Current: 25A
Burst Current: 50A
BEC: 5volts / 2amps
Weight: 42.5 Gram (including wires and plugs)
Battery Plug: XT-60
Motor Plug: 3.5mm Bullet Connector
Programming Options:
Brake (OFF/ON).
Cut-off Type (Soft-cut/Cut-off).
Cut-off Voltage (Low / Middle / High ).
Start Mode (Normal / Soft / Very Soft ).
Timing Mode (Low / Middle / High).
Cell (Auto, 2S, 3s, 4S).
Note: Programming can be done via the Optional programming card. See related items below.
This ESC requires the user to set the throttle range on installation. Please download the manual for further instructions.
-
Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller
Jack | Verified Buyer
-
Overall
-
Quality
-
Value
great ESC
Sep 23, 2017
screechhawk | Verified Buyer
-
Overall
-
Quality
-
Value
good quality
Sep 07, 2017
screechhawk | Verified Buyer
-
Overall
-
Quality
-
Value
good quality
Sep 07, 2017
Jack | Verified Buyer
-
Overall
-
Quality
-
Value
good ESC
Aug 05, 2017
| Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Mar 03, 2016
| Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Feb 03, 2016
Kadosh | Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Jan 05, 2016
divexis | Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Nov 23, 2015
Madnoob11@yahoo. | Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Oct 19, 2015
tneun | Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Oct 11, 2015
Manual | Download [89] |
Back TY-P1 Macro | Download [304] |
Capacitors | Download [2630] |
Capacitors | Download [3339] |
pin-out-better | Download [140] |
melted ground wire | Download [121] |
3 of 6 burn out of the box | Download [1074] |
3 of 6 burn out of the box | Download [885] |
Manual | Download [93] |
pin-board to flash without soldering | Download [2659] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!