Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

Turnigy™ TGY-306G-HV Ultra Fast/High Torque DS/MG/HV Alloy Case 25T 3.7kg / 0.05sec / 21g

Turnigy™ TGY-306G-HV Ultra Fast/High Torque DS/MG/HV Alloy Case 25T 3.7kg / 0...

QTY:

Now save save $0.00 $0.00

$25.74
Rating:
Stock:
Weight:
33 g
SKU:
9355000003

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

TGY-306G-HV High Voltage Ultra Fast/High Torque MG Digital Alloy Cased Servo  3.7kg / 0.05sec / 21g - Excellent 450 Heli & 3D servo.

Model: TGY-306G-HV
Operating Voltage: 4.8V / 6V / 7.2V
Operating Speed: 0.07sec.60º/ 0.06sec.60º/ 0.05sec.60º
 Stall Torque: 2.5kg.cm /3.1kg.cm /3.7kg.cm
Size: 22.9X12.1X27.3mm
Weight: 21g
Motor: 12mm Coreless
Potentiometer: indirect Drive
Ball bearing: 2 Ball Bearing
Gear: Metal 25T
Case: Aluminum
Connector wire: 220mm
Plug: JR/Universal

Product
Specifications

Additional Information

  • SKU:
    9355000003
  • Brand:
    Turnigy
  • Weight(g)
    33.00
  • Length
    51.00
  • Width:
    31.00
  • Height:
    46.00
  • Speed (Sec/60deg)
    0.05
  • Torque(kg)(min. 0.01kg)
    3.70
  • Unit Weight (g):
    21
  • A(mm):
    31.00
  • B(mm)
    23.00
  • C(mm)
    27.00
  • D(mm):
    12.00
  • E(mm):
    32.00
  • F(mm)
    20.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

playlist_add_check Overall
trending_up Value
verified_user Quality
Mám ho na zadní vrtulce a spokojenost už má za sebou i menší štouchanec o zem.
Cena serva ale jo stoji to zato. Jestli budou dělat i nah. převody tak super.
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
Bought this to replace an anologue servo that was the same speed as this.

Solved all my tail issues. Its a little heavy for a 250 probably more suited to cyclic on a 250.

The servo itself is great. good quality. good centering and well all i can say is it works and looks really nice!! Ill probably use this on a 450 soon and buy 2 more plus a lighter servo for the tail on my 250.

Highly recomended. worth the money. Can be seen in use on my video below

https://www.youtube.com/watch?v=gBJW0MAuS20
playlist_add_check Overall
trending_up Value
verified_user Quality
verified_user Quality
trending_up Value
playlist_add_check Overall
smooth servos, my 450 with them on cyclic flies much better!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It is the second servant who mount and after a few minutes of operation stops and no longer works.
I opened the servant and the cause of malfunction is caused by the failure of the two leads that connect the engine to the circuit board.
The two leads are attached to the board and cut the engine where the plastic begins
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It is the second servant who mount and after a few minutes of operation stops and no longer works.
I opened the servant and the cause of malfunction is caused by the failure of the two leads that connect the engine to the circuit board.
The two leads are attached to the board and cut the engine where the plastic begins
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice servos. I had failures of the output shaft due to crashing but fixed them with replacement gears. Servo is otherwise very strong and fast and some of them have nearly a 100 flights without any issues. All in all I have about ten of them in use and have no troubles. Only the output shaft breakages, but those were caused by crashes, so my or other technical faults not related to servos. I have ordered quite a few spare gears and plan to run only these servos for the next few years in order to only use one good type of servo on all my helis where they can be used.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Habe mir ein Goteck HC2123T HV gekauft und mit dem TGY-306G-HV verglichen. Die Masse sind die selben. usserlich fast keinen Unterschied, das TGY ist minimal besser verarbeitet und hat ein 3cm lngeres Kabel 18cm zu 21cm. Dafr ist das Goteck ein bisschen leichter, 20,36gr zu 20,58gr. , und die Schrauben sind im Gehuse vewrsenkt. Die Kraft und Geschwindigkeit sind fast identisch. Das Goteck ist made in China das TGY made in Taiwan. Das Goteck ist fast 5 Dollar gnstiger. Aber bei der Rckstellgenauigkeit und der Stellcharakteristik merkt man den Preisunterschied. Das Goteck ist zwar ziemlich spielfrei stellt aber nicht so genau zurck wie das TGY auf 10cm Verlngerung sind etwa 2mm Ungenauigkeit. Bei der Feinstellung (wenn ich nur mit der Trimmtaste meiner Futaba Steuerung stelle) ist das TGY viel besser fast 3 mal so genau. Das TGY reagiert bei jedem Trimmklick sauber und mit dem gleichen Abstand, das Goteck erst bei jedem 2. oder 3. Klick und dann in unregelmssigen Stellabstnden. Fazit:Das Goteck ist ein gutes Servo zu einem spitzen Preis. Wer es aber genauer will muss 25pcnt mehr bezahlen und bekommt mit dem TGY ein supper Servo. Ich hoffe ich konnte denen die das selbe interessiert hat helfen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works really as great as some savx in my 450 size heli (i think even better)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
j'ai monter 4 servos sur mon T REX 450 pro FBL V2 avec un MICRO BEAST X

et un ESC
Hobbyking YEP 60A (2~6S) SBEC Brushless Speed Controller

tous simplement extraordinaire malgr un bec qui dlivre seulement 5.5 volts
pour ces servos qui peuvent fonctionner sous 7.2 volts (nominal)

rapide ,prcis et pas un pet de jeu aprs une centaines de vols

anti couple hyper rapide et prcis

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not nearly as fast as advertised. Tested on a servo tester and found out that this just barely reaches 0.10sec/60.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • OXY 3 with 4 TGY 306 HV

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.