The TX-5822 Transmitter packs a huge 2.2 Watts of ultra-clean 5.8GHz power!
A must for those looking for the ultimate in long range, solidly locked in video. The TX-5822 has a full range of 32 channels and has 2 easy to use buttons for channel selection with super-bright LED alpha-numerical indictors.
The transmitter comes with a wiring harness ready to solder to your A/V plug of choice for your camera.
With its compact dimensions, the TX-5822 is perfect for a wide range of applications.
• 32 Channels
• Zero interaction with 2.4GHz signals
• Super-bright LED display
Frequency: ISM 5.8GHZ
RF output: 2200mW
Power supply: DC 7~12V
Current: 900mA @ 12V
Antenna impedance: 50Ω
Antenna gain: 3dB
Antenna connector: RP-SMA
Video output level: 1.0Vp-p Type/75Ω
Audio output level: 1.0Vp-p Type/10KΩ
Video system: NTSC/PAL Auto selection
Dimension: 60 x 42 x 24mm
Weight: 56g (inc all leads and antenna)
Band A: 5865 5845 5825 5805 5785 5765 5745 5725Mhz
Band B: 5733 5752 5771 5790 5809 5828 5847 5866Mhz
Band C: 5705 5685 5665 5645 5885 5905 5925 5945Mhz
Band D: 5740 5760 5780 5800 5820 5840 5860 5880Mhz
Note: Please make sure the Antenna is installed BEFORE connecting the power.
** The use and operation of this product in some countries may require a license based on local government restrictions. Ensure you check your local government rules before operating this device. **
It has worked for three months. Last week it has stopped working without any reason, in the middle of a flight. I'm waiting for the replacement. When it was working , i like it a lot. Very strong and clear signal. Have beaten every other tx that i own ( a few fatshark, boscam and its clones ) from 250 to 800mw.
You can keep a very good signal at all times with two cloverleafs for 3 - 5 Km. I do recommend, however, they should increase the quality to avoid failures like happened to me. Maybe I was out of luck...
PS. mine used to draw about 1.1A at 12v, so , a little bit more than on the specs. If you have a small drone it could impact your flight time.
First one I got was DOA, no lights nothing and powered on with 12V power... Hopefully the replacement comes through and after seeing someone above have the same issue I don't know if this was a good choiceTrasmitter delivered not working!!! No RF power to antenna. I have opened it and found central pin of SMA (NOT RP-SMA) connector not connected, I replace right connection and now it work, but i have to test it on long range. I'd like that HobbyKing partially refund me.