Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Variable pitch prop & motor set 10" Type A

Variable pitch prop & motor set 10" Type A

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
200 g
SKU:
OR025-01904
Product
Description

This easy to install unit will enable you to reverse the pitch of your brushless motor IN FLIGHT! The list of possible manuevers is endless! The unit includes 2 10" blades and outrunner motor, and the variable pitch assemble. You will need a servo to control the pitch assembly.

Spec.
Motor: D3124-1600kv
Voltage: 11.1v
Weight: (About) 43g
Prop: 10inch

Product
Specifications

Additional Information

  • SKU:
    OR025-01904
  • Brand:
    No
  • Shipping Weight(g)
    200.00
  • Length
    160.00
  • Width:
    46.00
  • Height:
    60.00
  • Kv(rpm/v)
    1600.00
  • Unit Weight (g)
    43
  • Max Currents (A):
    0.00
  • Resistance (mh):
    0.00
  • Max Voltage(V)
    11.00
  • Power (W)
    0.00
  • Shaft A(mm):
    4.00
  • Length B (mm):
    23.00
  • Diameter C(mm)
    31.00
  • Can Length D(mm)
    9.00
  • Total Length E(mm):
    45.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Well guys, after using many different Turnigy motors from 15g to over 500g units with great success, I have to say I'm very disappointed with this unit.

When it arrived, it looked "cheap". The 2mm dia pitch control rod fits sloppy in the 2.5mm hole in the 4mm motor shaft. This results in play on the head unit and allows the prop blades to move in pitch. You need rigidness here.

The motor itself weights 43g and so should easily consume 150W to 200W of input power. (Based on many Turnigy motor/prop combinations of power tests). After ensuring the prop was balanced using my magnetic turnigy prop balancer (an awesome product), I hooked up the motor to a 25A Plush controller, 2100mAh turnigy battery and my trusty Wattsup meter. (another solid product from HK).

I gave short slow power bursts, inially with no pitch and gradually increased the pitch. Sometimes there was vibration, other times none. Holding the pitch control rod helped reduce vibration. Finally, the head let go and went flying. This was at around 160W on the the meter. The blade broke and the mount snapped off (plastic parts).

After examining the motor, I found that the bearings were shot and windings/magnets were rubbing. The motor was warm, not hot to touch (sorry did not use my Turnigy thermometer)

I have a feeling that the blades are too big for this motor. They weigh 9g each and with any significant
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
looks different than on photo.



The one I got is even bigger.



performance is good, could be better.



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
son muy malos, he comprado 2, y los 2 crean vibraciones y explotan, no he podido volar con ellos
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
muito bom, vem de frente e vai de re, meu amigo esta aprendendo a andar de re... muito bom, altas manobras no chao, vira e alto torque pra puxa um mosquito
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
el sistema es bueno pero el motor no tiene potencia, se quemo a 25 amperes
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Performance can be improved by turning the motor and re-attaching the prop assembly.

verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.