The Runner 250 is the latest offering from Walkera which is packed with innovative features specifically designed for the FPV Racing fraternity. The modular design of the runner 250 allows you to change out race damaged components in a matter of minutes.
The speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair between races.
The full carbon fiber main frame of the runner 250 is super compact and tough and can easily handle those inevitable high speed gate collisions while the built in forward and rear LED lights help you with orientation when flying the runner 250 in line of sight.
The onboard OSD module overlays your flight footage with important race telemetry such as battery voltage and your runner 250's tilt angle.
This version of the Runner 250 really is race ready and comes supplied complete with built-in 800TVL camera, FCC approved video transmitter with mushroom style antenna, 2100Kv motors with matched ESC's, Runner 250 flight control system, OSD Module, 2.4Ghz Devo 7 transmitter, LiPoly battery and charger making the Runner 250 the perfect solution for beginners and pro FPV racers alike.
• Ready to fly 250 size racer
• Built-in 5.8Ghz FPV video transmitter
• Built-in OSD Module (On Screen Display) to show you real-time flight data
• Fully factory assembled, charge the battery and fly!
• Modular design for easy build and repair
• Self tightening toughened composite props
• Compact carbon fiber main frame
• Dampened camera mount platform
• Front and rear LED lights
• 12-14 mins flight time
Frame Diameter: 250mm
Weight: 530g (with battery)
Transmitter: Mode 2 DEVO 7
Flight Controller: FCS-Runner 250
FPV Transmitter: TX5816(FCC)/TX5817(CE)
Brushless Motor: WK-WS-28-014 (CW/CCW)
Brushless ESC: Runner 250
Battery: 11.1V 2200mAh 25C 3S LiPo
Flight Time: 12~14mins
Working Temperature: -10?~ +40?
Video Camera Specs:
Horizontal Resolution: 800TVL
System Format: PAL/NTSC
Video Out: 1.0Vp-p/75Ω
Power Input: DC 12V
1 x RTF Runner 250 Quadcopter
1 x Mode 2 Devo 7 transmitter
1 x 11.1V 2200mAH LiPoly Battery
1 x LiPoly charger and power adapter
Received my quad yesterday. It was in perfect condition. Charged the battery and checked all the screws for tightness. One motor screw wasn't tight. Everything else was fine. Set quad up for it's first flight test. Everything went just fine. Only had to add two clicks to the elevator trim and it was rock on. FPV is crisp and clear. I'm going to enjoy flying this quadcopter. Well worth the money and very good product. I do recommend it to beginner and experienced pilots.
RichardWow! For the money you will never beat this value. For true newbies that want to get into this segment or the hobby altogether this is a great start. No programming and comes pretty much complet versus buying a frame and figuring out all the motors and flight controller and then the fpv gear. No thought into this package. The package with goggles is great but there are lesser expensive goggles out there that would be less expensive for those just getting in.Coming from a DIY quad (Naze 32, cleanflight, lots of messing about with PID settings and prop combinations), I like the integration of this design. The rear red lights provide feedback for motor arming, tx bind and orientation. The fronts do a pretty good job of illumination too! The Tx is basic full sized TX with lots of knobs and very capable. However, it eats batteries (8AA's) so get a lipo. The quad is very stable in flight, but has a slight lean forward. The props are great, no more tightening nuts and flyaway props. I wish they had included another set. While the battery strap does its job fairly well, the battery still slides a little when pushed hard. I solved this by putting a Velcro square on the battery surface. Overall a solid value. No soldering or tinkering. Great if you just want to pop in the battery and go.