Wild Mighty Mite EDF Outrunner 5700kv for 60mm EDF
Wild Mighty Mite EDF Outrunner 5700kv for 60mm EDF
Awesome!
Copy and Share the Below URL
You wont find any fancy colours or pretty stickers on Hoffman motors. Performance is the key point here.
R(ohms)- 0.017
Weight- 75 grams
Battery- 2s-3s lipo
Watts- 650
Overall Length: 68.3mm
Standoff Length: 28mm
Shaft Diameter: 3mm
Shaft length: 9.9mm
Mounting Hole Bolt Circle: 16mm
Mtg. Hole Number & Size: 4 x M3
-
SKU EDF60HW
-
Brand -
-
Shipping Weight 155.0000
-
Length 0.00
-
Width 0.00
-
Height 0.00
-
Kv(rpm/v) 0.00
-
Max Current (A) 0.00
-
Resistance (mh) 0.00
-
Max Voltage(V) 0.00
-
Power (W) -
-
Shaft A(mm) 3.00
-
Length B (mm) 69.00
-
Diameter C(mm) 25.00
-
Can Length D(mm) 23.00
-
Total Length E(mm) 78.00
Can this motor fix in ducted fan 64mm with 3mm shaft.? I plain to get this one into my F-15 GWS
Can this motor fix in ducted fan 64mm with 3mm shaft.? I plain to get this one into my F-15 GWS
Mein Star ist dem Lehner Ebenbrdig Wasa EDF 51mm soooo Geil 3S1P2200mAh
Mein Star ist dem Lehner Ebenbrdig Wasa EDF 51mm soooo Geil 3S1P2200mAh
Very powerful EDF motor. I put one in a Great Planes L-39 with a CC-45 using an X-Flight fan using a 2250/4s pack. Talk about fast!!!
Very powerful EDF motor. I put one in a Great Planes L-39 with a CC-45 using an X-Flight fan using a 2250/4s pack. Talk about fast!!!
I hv rcvd this product w 1 of the 3 wires was broken, soldering fixed it & after tht installing it into Red Arrow with 80A ESC, 3S 30C batt., 64mmEDF with 7 blades. My formie crashed during d 1st flight as BEC was being cut after approx. 1.5mins flight. as tested, when i put thrt stick at abt 75%, it cut again, at 1st, i thought prblm from my brand new 80A ESC, thus I uninstall my 60A from my heli n tried but it's stil d same. all servo testedOK
I hv rcvd this product w 1 of the 3 wires was broken, soldering fixed it & after tht installing it into Red Arrow with 80A ESC, 3S 30C batt., 64mmEDF with 7 blades. My formie crashed during d 1st flight as BEC was being cut after approx. 1.5mins flight. as tested, when i put thrt stick at abt 75%, it cut again, at 1st, i thought prblm from my brand new 80A ESC, thus I uninstall my 60A from my heli n tried but it's stil d same. all servo testedOK
I tried this motor on the haoye 64mm fan 7 blade on 3 cell specs were 900w 90a started to smoke maybe on 2 cell
I tried this motor on the haoye 64mm fan 7 blade on 3 cell specs were 900w 90a started to smoke maybe on 2 cell
I thought it's only good for 3s. Does 4s work on it?
If it does will expect a rocket!!!
I thought it's only good for 3s. Does 4s work on it?
If it does will expect a rocket!!!
Edit last post. I purchased the Mighty Mite using 4s the Wild Mighty Mite uses 3s but the L-39 flys just great on the Mighty Mite. It appears they both have the same performance but the Wild Mighty Mite draws more amps.
Edit last post. I purchased the Mighty Mite using 4s the Wild Mighty Mite uses 3s but the L-39 flys just great on the Mighty Mite. It appears they both have the same performance but the Wild Mighty Mite draws more amps.
Very powerful EDF motor. I put one in a Great Planes L-39 with a CC-45 using an X-Flight fan using a 2250/4s pack. Talk about fast!!!
Very powerful EDF motor. I put one in a Great Planes L-39 with a CC-45 using an X-Flight fan using a 2250/4s pack. Talk about fast!!!