This little unit is powered by your receiver. It will record the peak altitude of your plane and weighs less than 2.2g.
Its dead easy to use. Once plugged in, it will zero and assume the power-up location is the ground/runway. Then after your flight, simply wave your finger over the LED and it will flash back to you the peak altitude of your plane for that flight. If your plane flew 345ft high, it will flash *** **** *****
Simple, no pc required, powered by your receiver and next to no weight gain for your plane.!
Altitude range: 50 to 7,000ft (50 to 2150m)
Resolution: .46ft (.14m)
Voltage: 3.2 ~ 12v
How the heck would it flash 0 ( zero ) times? you will get a ******* and then what for 7 000 feet?Very small, accurate enough, perfect for small planes. It is sometimes difficult to read from it but you can get use to it.great product, nice feature. And as always, low price.HowHigh - What Fun!
Just be a little careful, each flight I have pressed on up just a little higher, at 3200 feet the .91 powered plane was still happy to keep going up, but I pulled out.
Installation plug it in and fly - nothing to it.
SeeHow just great to use on the completion of the flight.Great price, very easy to use and quite accurate. I would recommend it to every glider pilot. I've been looking for something like this for years and here it is.....better than I could have expected!Very usefull for Side arm launch glider!
Little bit difficult to aim.
But after you realize how to aim, its very fun to measure last lauch height!First need some rope, but after you get the knack, its very easy to switch display mode!
Very good!I got the new version with feet & meters. The factory setting was in feet, I had to set it for counting in meters (very easy with the instructions) and it worked perfect. I find easier to switch off and then on and read the last altitude.wow! This little item should stay in every SAL/DLG you own! Easy to use and easy to place!
Now you can check your reached height after every throw. Simply wave your finger across the LED and count the flashs. No extra displays needed.Same as the WS Howhigh I can order here in the states but at a better price. This is what every sailplane owner needs for every sailplane they own or just use velco and move it. Easy to use, just wave your finger over the LED and count the altitude. Could not be simpler than tha.