Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

XK4074-2000KV Brushless Inrunner

XK4074-2000KV Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
542 g
SKU:
XK4074-2000KV
Product
Description

XK4074-2000KV Brushless Inrunner

Specs.
# of poles: 4
Max Amps: 120A
Max Volt: 14.8V
Max Watts: 1775W
Rpm/V: 2000kv 
Resistance: 0.0072 ohms
No-load Current: 1.7A(7.4V)
Dimension: 39.8mm x 73.8mm
Mounting hole depth: 7mm
Length of extend Shaft: 20mm
Shaft diameter: 5mm
Weight: 382g

Product
Specifications

Additional Information

  • SKU:
    XK4074-2000KV
  • Brand:
    N/A
  • Weight(g)
    542.00
  • Length
    0.00
  • Width:
    0.00
  • Height:
    0.00
  • Kv(rpm/v)
    2000.00
  • Max Currents (A)
    120.00
  • Power (W):
    1775.00
  • Length B (mm):
    74.00
  • Can Length D(mm)
    68.00
  • Max Voltage(V)
    15.00
  • Shaft A(mm):
    5.00
  • Unit Weight (g):
    382
  • Diameter C(mm)
    40.00
  • Total Length E(mm)
    94.00
  • Resistance (mh):
    7.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
tested today on termac with 1/8 scale buggy hyper 9e geared 15/40 lipo turnigy nanotech 4s1p 35C 4000mah , max 72amps peak, 1030watts, motor temp after 10min run 56celcius, outside temperature 21celcius all under body with 12v pc fun connect it ti balance wire directly , esc is mamba max pro castle temp after run 50celcius,
Overall this motor is great quality compared to castle creation honestly but u pay lot less opened to see inside my one has japan make bearings high speed one worth every dollar hanks hobbyking u r king!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good quality but 3650 2900kv in my hobbyking trooper is faster than him on my 1/8 truggy in 5s!!!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used this to replace stock Orion 2050 KV motor in a madforce kruiser VE. Surprisingly it runs a lot cooler and the truck has way more grunt than before. Second XK motor I own and use and couldn't be any hapier.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
rwnie polecam wspaniay, wykonanie i praca
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Eu coloquei este motor na minha T MAXX motor muito forte ,, ficou muito bom com uma bateria de lipo 4 s 4000 voce brinca quarenta minuto ou mais
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Don't buy this motor. I used it with 3s lipo and below than 50C and is burned with 5 battery uses.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Monstrous power of being able to move the heaviest model in difficult terrain
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
using this motor in a 1/8 buggy on 4s lipo's very quick and stays cool, couldn't be happier, I got another one coming for my e-truggy
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Welcome all of you!
I know the parameters for this? its mission to promote what capacity? I'm buying it this esc with a http://www.hobbyking.com/hobbycity/store/uh_viewitem.asp?idproduct=17979 k said my choice was correct or not? I am converting from electric car through this truggy
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I would like to be reviewing how this motor went in my E-revo however HK sent me some pos 36mm motor instead of what I ordered and payed for. Now because of HK's policies regarding returns and having to keep every scrap of packaging (that i threw out straight after opening) I am now stuck with A much cheaper motor that I can neither use or return.

After 70 orders and not one complaint till now I expected better service.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [49kb]
Size download now [51kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.