Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Durafly ™ DH110 Sea Vixen EDF Jet 1000 mm (ARF)

Generating Links

Durafly ™ DH110 Sea Vixen EDF Jet 1000 mm (ARF)

Precio:

Now save ahorra 0,00 € 0,00 €

78,79 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9306000021
¿Envío gratis? ¡Haga clic aquí! aprender más!

El Vixen del mar DH.110 era un avión de combate de ataque todo el tiempo / suelo con una disposición de cabina muy distintiva e inusual, la cabina del piloto que está siendo compensado y el observador sentado en el famoso "agujero de carbón", que fue prácticamente a oscuras y muy agobiante. El diseño en realidad se remonta a la década de 1940, que es bastante notable teniendo en cuenta el hecho de que el prototipo DH.110 fue el primer avión de dos asientos para alcanzar el vuelo supersónico. Sin embargo, una vez re-diseñado para aterrizajes de portador, la nueva ala gruesa impide que el Sea Vixen de alcanzar el vuelo supersónico a pesar de la enorme cantidad de energía a partir de los dos motores Rolls Royce.

El Vixen del mar está hecho de espuma dura de EPO y está muy bien acabado con calcas al agua. Además de analizar la parte, es fácil de montar y de configuración. Estar en ARF (casi listo para volar) forma, esta versión incluye la unidad de ventilación EDF, puntales de aterrizaje y no electrónica. Usted tendrá que añadir su propio motor, ESC, servos y se retrae electrónicos.

Jets están a punto el rendimiento y la Durafly® ™ Vixen del mar no es una excepción. Maneja magníficamente, las pistas así, ofrece una buena vuelta de la velocidad en WOT y tiene una excelente capacidad de vuelo lento gracias a la enorme cantidad de superficie de las alas. Cuando se combina esto con el rendimiento de la presencia real y detalle ultra-escala, el resultado final es un modelo brillante que los adeptos del chorro y pilotos por igual escala. El DH.110 incluso viene completo con tanques de combustible de gran detalle opcionales y ordenanza.

Rápido, estable, fiable, fácil de volar y el goteo de datos de escala, el Vixen del mar Durafly® ™ será un verdadero tapón de la demostración en cualquier campo de aviación!

caracteristicas:
Construcción resistente EPO
Alto detalle Tobogán Adhesivos
Detalle Ultra-Scale
Asamblea fácil
Versión ARF (sin componentes electrónicos incluidos)

Especificaciones:
Envergadura: 1000mm
Longitud: 888mm
Peso del vuelo: 1500g
EDF: 70mm

incluye:
Todo el hardware
puntales de aterrizaje
tanques de gota opcionales / ordenanza
Instrucciones

Se requiere:
Su propio canal 5 ~ 6 Transmisor / Receptor
9 ~ servos 11g x 4
Servoless retrae x 3
2836 motor sin escobillas (alrededor 3000KV recomendado)
45 ~ 60A ESC (w / UBEC separada recomendado)
3300mAh batería 4S LiPoly (25c mínimo)

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Nick | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 30, 2014

Very well put together, although you will need many coats of resin, such as eze kote on the fuselage to protect the foam. A good size for a 70mm motor model. Bin the glue included and use epoxy. Pay special attention to the two booms, which are the weak point, so plenty of Coates of resin there. The butt glued wings are fine and don't need strengthening. I just purchased the airframe and used the excellent alloy HK DPS 70mm lightweight alloy fan unit. Together with HK blue 80A ESC and the standard Turingy 3300 4S battery, the performance is really good with 6 mins to 25pcnt. One point to take care of is the C of G, if you do it by the book, make sure that the elevator is neutral if hand launching. Any up on the trim will result in pitch up on launch. Expect to trim in up to 5 clicks down for normal flying after hand launch.

Timmybeetle | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 14, 2013

Build this kit with spare parts I allready had.
Used 3 dig. Servo's from HK 9 gram, at this moment I use a turnigy 2836/3700kv motor.I have to be carefull with throttle puls around 70 amps with a 4s4000 lipo.
Lies hlf throttle flying time around 6-7 minutes. I handlaunch because no LG installed but is easy to do and landing is a peace of cake, she floats fore ever. Very nice plane and good flying performance. Build is easy takes around 2 hours. Enjoying this plane.
Test flight done 12 nov 2013 went pefectly cok9leted 3 flights no issues.
Grts timmybeetle

clark | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 20, 2013

Great plane easy to put together i recommend the RTF if you ever wanna try retracts. I'm running the 4S 3850mah 10Blade 3000kv sound and flies great pulls 1250watts 85amps . I ordered some carbon fiber to reinforce the tail booms.

Tartago | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 17, 2012

Excellent packing! Beautiful plane.

I used a CS 10 blade with a Turnigy 2855 2100kv on 5s.

The take off run is a bit long but she goes to the air in a realistic way, without jump.

She looks amazing on the air. My setup is good enough for relaxed flying. I plan to use 6s in the future to improve the speed.

Landing is a piece of cake.

Well done HK!

WTWUK | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 14, 2012

Delivered complete, no parts missing and with absolutely zero damage! And even better - the markings are applied perfectly! No blistering of the decals whatsoever, so no need to repaint this one!
The fit of parts is excellent with nothing out of line.
Will be converting this so it has rudders. Servo in each fin will do the trick. To compensate for the weight added, I will remove what I assume is a large lump of metal from horizontal stabiliser, as that part is very heavy. Will replace it with a carbon spar and can then also up the battery pack size.
All in all, this is an excellent kit considering the price!

Archivos de clientes
ESC programming manual Download [900]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios