HobbyKing de gran tamaño para trabajo pesado soporte Modelo

Overall the product looked and functioned as it appears in the picture, however, when I attempted to assemble it I found that the round holes drilled in the end pieces where the tubes fit into place were oversized and the tubes would not hold the end pieces in place. My remedy for this was to put a piece of shrink tubing over the end of each tube and then press it in place. This did work but I do consider this situation to be a manufacturing problem. Until this problem is resolved I wouldn't buy this product

I have the medium stand of these and its big brother is just as well made and robust. Carbon tubes for the joiners are a good idea. Roughed up the ends and glued them all together with Gorrila Glue.

Solid well made and oh so useful at the field or in the workshop.

The edges are a little bit rough but this is everithing negative what i can find.

I could fit from small DLG up to Big Sailplanes and 3D Airplanes.

This stand is perfect for the lqrge scale planes i work on. The down side is that you need to glue it together or otherwise it falls apart when working on planes. This makes it useless for in fields repairs. I will ttry to find a nut to fit in the tubes to ba able unscrew it for field use.

This thing is very usefull at the field as well as in the workroom. Highly recommended. Good quality product and worth the money.

I was going to make a stand but for this money whats the point.
Its well made from laminated wood.
Much bigger than you think its going to be, only needed the medium size but it wasn't in stock.
It will be great for my big gliders but it would also be excellent for boats

Arrived this morning and has already been pressed into service.
It is brilliant, where has this piece of kit been all of my life? it makes everything so much easier. Good one

Works, but kind of on the cheap side. wood ply just slapped together and the footing is not balanced. makes a great templates to build it yourself.

good Hobbyking Large Size Heavy Duty Model Stand

Good, simple flexible design that securely holds large models - for the price of smaller, inferior alternatives made of semi-rigid expanded foam. By comparison this fully adjustable, plywood construction provides really solid support & a higher working level. I've got a 6.5kg, fifth scale Cessna 152 sat in it, for an undercart overhaul, as I pen this review & it looks like a toy! This stand should easily cope with models twice this size / weight - such as 1/4 scale warbird...... It arrives flat-packed but goes together in a few minutes. The 18mm CF horizontal rods are a good friction fit in the plywood sockets - so no gluing required if you don't want to - giving the option to disassemble for storage or transport if required ..... Ive deducted one star for quality because, as Beemer444 mentions in his review, the 5/8" ply is not particularly well laminated. Looks like they used poor quality glue & insufficient pressure when bonding. If I can be bothered, one day, I might just give the edges a run-over with a coat of varnish or PVA etc. - just a shame - I would happily have paid HK a few dollars more for a better quality of plywood - but that's probably a little churlish its a great product.