Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global

HobbyKing Multi-Rotor de control Junta V3.0 (Atmega328 PA)

HobbyKing Multi-Rotor de control Junta V3.0 (Atmega328 PA)

QTY:

Now save guardar 0,00 € 0,00 €

10,95 €
Stock:
Peso:
99 g
SKU:
9171000011

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Sobre la base de la placa de control KK popular y ya bien apoyado, la tarjeta de control Hobbyking Multi-Rotor está trayendo Multi-Rotor locura de las masas con sus avances en calidad y precio!

La placa de control HobbyKing Multi-Rotor utiliza giroscopios japonés Murata piezoeléctricos que son menos sensibles a las vibraciones que giroscopios tipo SMD y también cuenta con el estado de la técnica de fabricación SMT para asegurar la calidad. Esta placa también utiliza una programable por el usuario Atmega328PA IC.

Especificaciones.
Tamaño: 50.5mm x 50.5mm x 23.5mm
Peso: 14,5 gramos
IC: Atmega328 PA
Gyro: Murata Piezo
Voltaje de entrada: 3.3-5.5V
Señal del receptor: 1520us (4 canales)
Señal de ESC: 1520us


¿Cuál es un tablero de control Multi-Rotor lo preguntas?

El controlador HobbyKing Multi-Rotor es un tablero de control de vuelo para multi-rotor de la aeronave (Tricopters, cuadricóptero, Hexcopters). Su objetivo es estabilizar la aeronave durante el vuelo. Para ello se necesita la señal de los tres en los giroscopios de mesa (balance, cabeceo y guiñada) a continuación, pasa la señal a la Atmega328PA IC. La unidad Atmega328PA IC procesa estas señales según la usuarios de software instalado y pasa las señales de control a los controladores electrónicos de velocidad instalados (CES). Estas señales instruyen a los CES para hacer ajustes precisos en la velocidad de rotación de motores que a su vez estabiliza su embarcación multi-rotor.

La placa de control HobbyKing Multi-Rotor también utiliza señales de su receptor sistemas de radio (Rx) y pasa estas señales al IC Atmega328PA través de las entradas ail, ele, Thr y Rud. Una vez que esta información ha sido procesado el IC enviará señales que varían de los CES que a su vez ajustar la velocidad de rotación de cada motor para inducir vuelo controlado (arriba, abajo, hacia atrás, hacia delante, izquierda, derecha, guiñada).

Nota: Un manual de usuario está disponible en la ficha archivos.
* Las regalías pagadas por cada unidad vendida a Rolf, el diseñador original KK.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9171000011
  • Brand:
    HobbyKing
  • Peso ( g)
    99.00
  • Longitud
    140.00
  • Ancho:
    34.00
  • Altura:
    72.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Got this board and it will not work on my quad. Tried everything and it will not even flash successfully. Board is dead. No lights flash. Nothing. Tried my buddy's board and all works good he tried this board and its dead. I always get the broken one. Just my luck.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I recommend the Flash tool for this. I know that they say it comes set up for a Quad but mine did not. I had to buy the kk2 board because when I went to buy the flash tool it was not in stock. I'm not going to complain because once i receive my flash tool Ill have to build another multirotor... :) o well...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gut fr den Einstieg, jedoch ohne Erfahrung wo man wie drehen muss eher schwierig. Durch das Brett mit dem Display leicht zu toppen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to use basic control board works well as it comes.
Can be set up easily using the gyro adjuster pots without needing any fancy gear.
Only suitable for x copter unless you have a lead and PC software to change over to other configuration but for my first multirota its perfect.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great starter FC for your first quad. Definitely is limited in functions but you won't find anything this cheap. Annoying to configure and load firmware but otherwise it everything works out fine. Trimming the PID's can be frustrating but that is the case with any FC. Just watch some videos and try understanding it. The manual potentiometers are GREAT for first timers because you will be constantly changing them before getting it just right. Overall, I am glad this was my first FC. Taught me a lot and in the end I was pretty 'locked in' and happy with it. I have since moved up to Multiwii's and Naze32's but I would definitely recommend this as a first.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good board easy to programm with USBasp
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
placa justeta. tal i com ve de fabrica es per quad .
funciona mes o menys be. pero li falta fiabilitat.
economica pero justeta.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1 crown, because the one i got doesn't work at all...
Moreover, there's a large amount of soldering flux left on the board and all soldering points are oxydized.
I didn't (and won't) contact the support center for a so cheap item so i ordered a new one to try again. Hope the next one will work !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The board will appear to not work when you get it. You have to hold your throttle all the way down and to the right for 5 seconds to get the board to "arm". A little led light will come on and everything works after that
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Looks like a good board but i brought it for a tricopter and couldnt find any way to make it work looks like it would be perfect for a quad but now that i have the kk 2 board i wouldnt look at any thing else
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Xcopter Scratch Built Stable Quadcopter

  • Xcopter Scratch Built Stable Quadcopter

  • Xcopter Scratch Built Stable Quadcopter

  • Xcopter Scratch Built Stable Quadcopter

Upload video
Upload
Files

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.