New Items Noticias Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Marco ST360 Quadcopter w / Motores y hélices 360mm

Marco ST360 Quadcopter w / Motores y hélices 360mm

Discontinued Product

Please continue searching for a similar product.
SKU:
031000132
WANT FREE SHIPPING? Click here to find out more!

El ST360 es una trama de 360 ​​mm quadcopter bien pensado construido con materiales de calidad. El bastidor principal es de aleación de aluminio mientras que los brazos se construyen a partir de poliamida de nylon ultra resistente.

El montaje es muy sencillo con todo el hardware necesario incluido. El ST360 incluso incluye 4 motores y hélices eliminación de todas las conjeturas de la elección de su propio sistema de energía. Usted sólo tendrá que añadir sus propios CES sin escobillas, tablero de control multi-rotor, batería 3S Lipoly y del sistema de radio 4 canales.

Una gran característica de este marco es de los grandes lengüetas de montaje en la parte delantera y trasera de la placa principal marco inferior para las cámaras de montaje u otros accesorios. Esto hace que para una gran manera de tomar video aérea o volar FPV sin la necesidad de añadir otros soportes de montaje.

El ST360 también cuenta con brazos de color blanco (2 y 2 amarillos) que son ideales para la orientación. Ayuda a mantener volando en la dirección correcta.

Ofrecemos una línea completa de productos electrónicos de multi-rotor como el tablero de control multi-rotor, los CES y más. Nunca ha sido tan fácil y asequible para obtener un quadcopter en el aire!

caracteristicas:
• Construida en aleación de aluminio de alta calidad y nylon poliamida.
• Los brazos de colores para la orientación para mantenerlo volando en la dirección correcta.
• Grandes pestañas de montaje en la placa principal inferior del marco para facilitar el montaje de la cámara.
• Fácil montaje.

Especificaciones:
Ancho: 360 mm
Altura: 90 mm
Peso: 170 g (w / salida de la electrónica)
Agujeros de montaje del motor de pernos: 16 / 19mm

Incluido en la caja:
Marco ST360 Quadcopter
4 x motor sin escobillas ST2210
4 x 8045 hélice
correa de la batería
Todo el hardware necesario

Necesario:
Su propio transmisor y el receptor de 4 canales
4 x 15 ~ 25 Amp ESC
1 x Multi-Rotor Junta de Control de HobbyKing
1 x batería de 1800 ~ 3000mAh 3S 11.1v Lipo

  • SKU (Número de Referencia) 031000132
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 740.0000
  • Longitud 260.00
  • Packaging Width 50.00
  • Altura 220.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The prop adapters keep falling of the motors. No matter how hard I tighten them. Be warned. You will need some sort of landing gear if you mount your battery under the frame. I'm using kk2 with hobbykings 20amp esc flashed with Simonk. Flies ok once you get it tuned in.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The prop adapters keep falling of the motors. No matter how hard I tighten them. Be warned. You will need some sort of landing gear if you mount your battery under the frame. I'm using kk2 with hobbykings 20amp esc flashed with Simonk. Flies ok once you get it tuned in.

This frame package is a good deal for a beginner, but suffers from poor design and quality issues.
Quality wise, my frame came with screws that were too large to fit through the holes in the aluminium plates - I had to manually enlarge each hole first before attempting to use these screws. After getting the screws 80pcnt of the way in, the heads stripped on EVERY single screw. Instead of being a cross head, they are a tiny Hex/allen key, whilst I had the right tool, the poor quality of the screws meant that as soon as they started meeting resistance, the head was stripped, rendering them all useless. I had to buy a new set of screws (which are very hard to find and expensive due to their size).
Design wise, the frame leaves no space for a battery, you are left to mount it underneath. The legs are too small for this and your quadcopter is expected to land on the battery which is hugely dangerous. Take a look around online and you will notice anyone with this quad has had to buy/build their own legs to get around this issue.
The redeeming factor is that the motors seem to be pretty decent and its fairly good value overall. Although I would rather have spent 10pcnt more and got a similar deal elsewhere for a better quality kit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This frame package is a good deal for a beginner, but suffers from poor design and quality issues.
Quality wise, my frame came with screws that were too large to fit through the holes in the aluminium plates - I had to manually enlarge each hole first before attempting to use these screws. After getting the screws 80pcnt of the way in, the heads stripped on EVERY single screw. Instead of being a cross head, they are a tiny Hex/allen key, whilst I had the right tool, the poor quality of the screws meant that as soon as they started meeting resistance, the head was stripped, rendering them all useless. I had to buy a new set of screws (which are very hard to find and expensive due to their size).
Design wise, the frame leaves no space for a battery, you are left to mount it underneath. The legs are too small for this and your quadcopter is expected to land on the battery which is hugely dangerous. Take a look around online and you will notice anyone with this quad has had to buy/build their own legs to get around this issue.
The redeeming factor is that the motors seem to be pretty decent and its fairly good value overall. Although I would rather have spent 10pcnt more and got a similar deal elsewhere for a better quality kit.

Great kit for the money, plastic arms can break easily if your a beginner but it's cheap enough to replace even buy a new kit for spares. Motors are very good, very happy with it. Flies awesome.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great kit for the money, plastic arms can break easily if your a beginner but it's cheap enough to replace even buy a new kit for spares. Motors are very good, very happy with it. Flies awesome.

Loving this quad. I'm using an emax 4x esc with the kk2.1.5 board. Flies like a toy Hubsan quad - in a good way. Very responsive. Much smoother than a 450 size and big enough to still see. I get 13 minutes on FPV with a 3700mah battery. I stink at FPV, but I get similar flight times flying it harder line of sight. Amazing. Had one mishap that broke the foot on of the arms and nothing else. My 450 quad would have been in pieces.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Loving this quad. I'm using an emax 4x esc with the kk2.1.5 board. Flies like a toy Hubsan quad - in a good way. Very responsive. Much smoother than a 450 size and big enough to still see. I get 13 minutes on FPV with a 3700mah battery. I stink at FPV, but I get similar flight times flying it harder line of sight. Amazing. Had one mishap that broke the foot on of the arms and nothing else. My 450 quad would have been in pieces.

Excellent product. Not a lot of space between plates but easy with use of standoff.
Motors are powerfull.
My setup:
ESC: 30a afro
FC: KK1.5v4sc
HK PowerBoard 3.5mm bullets
3S 2200 ZippyCompact
13 minutes flight

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent product. Not a lot of space between plates but easy with use of standoff.
Motors are powerfull.
My setup:
ESC: 30a afro
FC: KK1.5v4sc
HK PowerBoard 3.5mm bullets
3S 2200 ZippyCompact
13 minutes flight

My first Quad, Flies like a champ with the HK 2.1 board. All in without a radio the build was $110.00 US. Can`t beat it ! total assembly time about 3-4 hours. Motors are so quiet my friend with a DJI Phantom is jealous. I had to dial in lower rates on the T 9x it is so sensitive to stick movement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My first Quad, Flies like a champ with the HK 2.1 board. All in without a radio the build was $110.00 US. Can`t beat it ! total assembly time about 3-4 hours. Motors are so quiet my friend with a DJI Phantom is jealous. I had to dial in lower rates on the T 9x it is so sensitive to stick movement.

Great quadcopter to get in the hobby , good value .
Do not overtighten the screws, you must buy m3x10 screws seperately to mount the motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great quadcopter to get in the hobby , good value .
Do not overtighten the screws, you must buy m3x10 screws seperately to mount the motor.

It's a nice looking frame, but it has some downs. The holes for the lower aluminium plate didn't quite fit. Some force was needed to get the screws in with an angle.
Second problem is that the holes for the motors were fitting, but the screws length didn't allow to really get more than one or two turns into the motor.
I needed to make some corrections here. A little longer screws should do the job, but I worked on the plastic of the arm.
And the last downer: the motor on full throttle is really bending the arms. They should be a little more stiff imho. But that shouldn't matter too much, when in the air.

Still I love the product, but it could be a better quality to make it perfect.

My configuration is with a NanoWii controller (MultiWii 2.3) and Afro 20A Slim ESCs.
The Motors fall out of sync again and again and I need to investigate how to fix that. But thats another story... related to the ESCs I guess.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a nice looking frame, but it has some downs. The holes for the lower aluminium plate didn't quite fit. Some force was needed to get the screws in with an angle.
Second problem is that the holes for the motors were fitting, but the screws length didn't allow to really get more than one or two turns into the motor.
I needed to make some corrections here. A little longer screws should do the job, but I worked on the plastic of the arm.
And the last downer: the motor on full throttle is really bending the arms. They should be a little more stiff imho. But that shouldn't matter too much, when in the air.

Still I love the product, but it could be a better quality to make it perfect.

My configuration is with a NanoWii controller (MultiWii 2.3) and Afro 20A Slim ESCs.
The Motors fall out of sync again and again and I need to investigate how to fix that. But thats another story... related to the ESCs I guess.

I've bought several of these. The motors, props, and arms are what break, so it's a really good repair kit for itself. However, the recent ones I've bought all have the same stupid flaw, the bottom panel has the holes drilled in the wrong place! They don't line up with the leg holes at all. I compared it to one that I built about 6 months ago (The first one) and the legs are the same, but the bottom plate's holes are in a different place... Bummer, because I'm trying to build a second one right now.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've bought several of these. The motors, props, and arms are what break, so it's a really good repair kit for itself. However, the recent ones I've bought all have the same stupid flaw, the bottom panel has the holes drilled in the wrong place! They don't line up with the leg holes at all. I compared it to one that I built about 6 months ago (The first one) and the legs are the same, but the bottom plate's holes are in a different place... Bummer, because I'm trying to build a second one right now.

It's really good, very stable frame. Frame weight is 170 g, frame motors escs (Multistar 15A) is 400 g, take off weight (with Zippy 1800mAh 3S, Hobbyking Multi-Rotor Control Board V2.1, Turnigy 9X receiver and some wires) is 645 g. Hovering power consumption 6-7A with 3S, flying time is about 15 min. 2S setup is not flyable.
This quad could take up to 350g payload, but i prefer flying with FPV equipment of about 90g. There's enough space to place an Arducopter board with GPS module and telemetry small FPV set.
To sum up, it is an excellent, extremely durable quad and it's very affordable!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's really good, very stable frame. Frame weight is 170 g, frame motors escs (Multistar 15A) is 400 g, take off weight (with Zippy 1800mAh 3S, Hobbyking Multi-Rotor Control Board V2.1, Turnigy 9X receiver and some wires) is 645 g. Hovering power consumption 6-7A with 3S, flying time is about 15 min. 2S setup is not flyable.
This quad could take up to 350g payload, but i prefer flying with FPV equipment of about 90g. There's enough space to place an Arducopter board with GPS module and telemetry small FPV set.
To sum up, it is an excellent, extremely durable quad and it's very affordable!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
No File Name Download [2192]
No File Name Download [2192]
ready to fly with KK2.0 v1.5 Download [70]
ST360 Download [567]
Myself with the quad Download [989]
everything required Download [4227]
here Download [1639]
ST360 Download [2496]
upgrade chassis Download [138]
No File Name Download [283]
  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking