New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy Aerodrive SK3 - 3530-1460kv sin escobillas del motor Outrunner

Turnigy Aerodrive SK3 - 3530-1460kv sin escobillas del motor Outrunner

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

22,98 €
Estado:
En stock
SKU:
SK3-3530-1460
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors son el siguiente salto de calidad y diseño del motor. Nos instruyó a los ingenieros a la fuente de la mejor calidad de los imanes, los cojinetes y los materiales disponibles para ellos y desarrollar un motor que no sólo rival, pero superar la calidad de muchos de motor principales fabricantes en el mercado hoy en día.

El resultado es un eficiente y de alta calidad de motor calibre usando cojinetes blindados dobles, imanes de neodimio sinterizado y un estator herida cadena asegurar una precisa y consistente cada devanado y cada vez.

Los motores Turnigy SK3 se adaptan a los modeladores que buscan un motor sin escobillas calidad sin compromiso.

Especificaciones.
Activa: 22T
Voltaje: 2 ~ 3S Lipo
RPM / V 1460 kv
La resistencia interna: 0.045 Ohm
Max carga: 33A
Potencia máxima: 430W
Diámetro del eje: 4.0mm
Agujeros de los tornillos de 25 mm:
Rosca del tornillo: M3
Peso: 75g
Motor de enchufe: 3,5 mm conector de bala

  • SKU (Número de Referencia) SK3-3530-1460
  • Brand SK3
  • Peso 170.0000
  • Longitud 110.00
  • Ancho 45.00
  • Altura 80.00
  • Kv (rpm / v) 1460.00
  • Corrientes max (A) 33.00
  • Resistencia ( MH ) 45.00
  • Max Voltaje ( V ) 11.00
  • Potencia ( W ) 430.00
  • Un eje ( mm ) 4.00
  • B Longitud ( mm ) 31.00
  • C Diámetro ( mm ) 37.00
  • Puede longitud D ( mm ) 10.00
  • Longitud Total E ( mm ) 52.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good motor for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motor for the price.

Smooth running, good quality.

Testet 8x5 sport Propeller. Unless it is an "E" Proppel or a bigger one a 8x5 is too small. In Comparison with motor size and amp capabilities

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Smooth running, good quality.

Testet 8x5 sport Propeller. Unless it is an "E" Proppel or a bigger one a 8x5 is too small. In Comparison with motor size and amp capabilities

Motor has terrible vibration and it is unusable. Even with no propeller it makes strange noises. Bearings or shaft is bad. I will need to buy some other more quality motor...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor has terrible vibration and it is unusable. Even with no propeller it makes strange noises. Bearings or shaft is bad. I will need to buy some other more quality motor...

Flies in my Cosmic Wind<br>

On 3S1P 2200mAh<BR>
With an APC 8x6E prop - 384W at 34A<br>
With an APC 8x8E prop - 430W at 43A<br>
<br>
On 4S1P 2200mAh<br>
With an APC 8x6E prop - 599W at 41A<br>

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flies in my Cosmic Wind<br>

On 3S1P 2200mAh<BR>
With an APC 8x6E prop - 384W at 34A<br>
With an APC 8x8E prop - 430W at 43A<br>
<br>
On 4S1P 2200mAh<br>
With an APC 8x6E prop - 599W at 41A<br>

Very nice motor and I highly recommend these as a very good value. Nice accessory pack with prop adapters for front or rear mount and nice mount. 378Watt; 36 amps with 2200mAh 30C Lipo and 9x4 APC (genuine not copy) prop. cruise (50pcnt throttle over five minutes) I get about 135W or - a 10 inch prop beyond the safe limit, but in reality the RPMs are likely well below theoretical, unfortunately I don't have good enough lighting to get a reliable reading from my prop Tacho. Powers my 820g AUW 1000mm wingspan scratch build Spitfire perfectly, great power at cruise, and unlimited vertical at less than 3/4 throttle. Handled a straight in WOT crash on first scratch build without a scratch... loads of mud cleaned out with HOT water jet, WD40 soak, and machine oil lube ... makes a bit of bearing noise now but runs great ... two dozen flights since and going great!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice motor and I highly recommend these as a very good value. Nice accessory pack with prop adapters for front or rear mount and nice mount. 378Watt; 36 amps with 2200mAh 30C Lipo and 9x4 APC (genuine not copy) prop. cruise (50pcnt throttle over five minutes) I get about 135W or - a 10 inch prop beyond the safe limit, but in reality the RPMs are likely well below theoretical, unfortunately I don't have good enough lighting to get a reliable reading from my prop Tacho. Powers my 820g AUW 1000mm wingspan scratch build Spitfire perfectly, great power at cruise, and unlimited vertical at less than 3/4 throttle. Handled a straight in WOT crash on first scratch build without a scratch... loads of mud cleaned out with HOT water jet, WD40 soak, and machine oil lube ... makes a bit of bearing noise now but runs great ... two dozen flights since and going great!

Current draw with a 8x3.8 prop = 34 amps (peak). Seems to be the recommended prop for this motor. Haven't checked the flight performance yet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Current draw with a 8x3.8 prop = 34 amps (peak). Seems to be the recommended prop for this motor. Haven't checked the flight performance yet.

Ein Qualitativ hochstehender Antrieb. Sehr schn verarbeitet, smliches bentigtes Zubehr inklusive. Sehr gut verpackt, verwende ihn in einem You can Fly von Hype, zusammen mit dem 40A BlueSeries Brushless Speed Controler als Ersatz fr die abgebrannte Originalausrstung.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ein Qualitativ hochstehender Antrieb. Sehr schn verarbeitet, smliches bentigtes Zubehr inklusive. Sehr gut verpackt, verwende ihn in einem You can Fly von Hype, zusammen mit dem 40A BlueSeries Brushless Speed Controler als Ersatz fr die abgebrannte Originalausrstung.

, 10*6, 35-70 3S 55A , 3 0.35 1 0.25, 4 0.35 , .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

, 10*6, 35-70 3S 55A , 3 0.35 1 0.25, 4 0.35 , .

Hi, im using it with turnigy plush 40a and 11x6 carbon fibre folding prop on my phoenix 1600 glider , it is super power full , very pleased with it .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, im using it with turnigy plush 40a and 11x6 carbon fibre folding prop on my phoenix 1600 glider , it is super power full , very pleased with it .

you cannot use full power running a 10x6 folding prop. i just burn my motor. use 9 or 8 inch props with this motor. oh well, would be nice if prop sizes were tested to go with the motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

you cannot use full power running a 10x6 folding prop. i just burn my motor. use 9 or 8 inch props with this motor. oh well, would be nice if prop sizes were tested to go with the motor.

  1. 1
  2. 2
Customer files
SK3-3530(DT3007-14P) MOTOR (edited).pdf Download [131]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save