Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Z700-V2 marco Quadcopter Blanco / Rojo Con cangrejo tren de aterrizaje (700 mm) V2

Z700-V2 marco Quadcopter Blanco / Rojo Con cangrejo tren de aterrizaje (700 m...

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
825 g
SKU:
450000065-0

Combine

essential items and
acc
Descripción
del

El Z700-V2 es una trama de 700 mm quad de gran tamaño y bien pensado construido con materiales de calidad. El bastidor principal es de fibra de vidrio mientras que los brazos se construyen a partir de poliamida de nylon ultra-durable.

El montaje es muy sencillo con manguitos de latón pre-roscado para todos los pernos del marco, por lo que no se requieren cierres tuercas. Una gran característica de este marco es de los grandes lengüetas de montaje en la parte delantera y trasera de la placa principal marco inferior para las cámaras de montaje u otros accesorios. Esto hace que para una gran manera de tomar video aérea o volar FPV sin la necesidad de añadir otros soportes de montaje.

El Z700 también cuenta con brazos de colores (2 blancos y 2 rojos) que son excelentes para la orientación. Ayuda a mantener volando la dirección correcta sin necesidad de apoyos de diferentes colores.

El Z700 incluye un tren de aterrizaje de cangrejo estilo hi-pierna establecido y un soporte de gancho y varilla de montaje. Ofrecemos una línea completa de productos electrónicos de multi-rotor como el control multi-rotor de planchar, ESC y motores. Nunca ha sido tan fácil y asequible para obtener un quad en el aire!

caracteristicas:
• Construido a partir de fibra de vidrio de calidad y nylon poliamida.
• Pre-roscado manguitos de latón para todos los pernos del marco.
• Los brazos de colores para la orientación para mantenerlo volando en la dirección correcta.
• tren de aterrizaje estilo cangrejo Hi-pierna
• Opciones de montaje de gancho y varilla
• Grandes pestañas de montaje en la placa principal inferior del marco para facilitar el montaje de la cámara.
• Fácil montaje.

Especificaciones:
Ancho: 700 mm
Altura: 58 mm w / o de cangrejo 258 mm de engranaje con el engranaje de cangrejo
Peso: 570g (w incluido el engranaje / cangrejo hi-lift)
Agujeros de montaje del motor de pernos: 16 / 19mm
H
ook la barra del carril: 55-60mm centro de la barra central de 12 mm (11.75mm)

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    450000065-0
  • Brand:
    No
  • Capacidad ( mAh )
    No
  • Peso ( g)
    825.00
  • Longitud:
    320.00
  • Ancho:
    65.00
  • Altura
    215.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
First off, as quadcopter frames go and as the title suggests, this frame is enormous. For that reason, I have given this frame a slightly better score than I should have since it does come with a few errors. The brass sleeves for the screws are slightly covered by plastic and you have to spend a bit of time removing it. The motor mounting holes are irregular and you may need a few extra screws and some adapters to attach your motors. This aside however, I was surprised that my 2kg quad didn't buckle at the arm joints and fall to the ground in spectacular fashion. In fact, it flew almost perfectly first flight with an ardupilot controller. This frame is perfect if you're aiming to build for cinematography, photography (since the included crab legs are a plus) and if you just want to fly a huge quad. Good luck!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just as others have stated the arms are to flexible. I was having problems with stability and the quad wanting to twist to the right no matter what I did. I ordered the Upswept Upgrade Arms for DJI Flamewheel Style Multirotors V500 / H550 (Blue) (2pcs), installed them and all my problems disapeared so if you want wide center frame plates you can buy this but count on doing something to apgrade the weak flexible arms
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
gran i facil de veure a l'aire. espai de sobres per ficar una apm 2.6 amb tota la trasteria. osd, gps etc. fora estable i facil de monta. els braos flexan bastant pero en vol va fora be.
motors 2830 amb pala 9x4, variadors de 40amp i bateries 3s 5200mha. un dron mes que funciona
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
There's been a lot of complaints about the flexible arms, and I have a solution. Lightly sand the outer sides so epoxy will adhere, then epoxy carbon fiber strips on both sides of the arms. This will stiffen the arms enough to allow for stable flight. Steve
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The arms flex way too much. Lots of vibration. The center section is fine, lots of room, good construction. Stiffen up the arms and it will be fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Does not fly well at all. Excessive arm flex creates huge instability problems. Unsuitable for fun flying to say nothing of using it for a video platform. FORGET this platform and look for something else.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
OK I wanted to go bigger than my F450 Quad so I decided to give this a try even though a few people have said there was too much arm flex. Anyway after putting it all together the first flight was smooth but Quad rotated right and needed left rudder to correct. I went through the quad again after posting for help in a few places and 1 arm may have been twisted enough to cause the problem because after slightly bending it after heating it and letting it cool down may have fixed it ( also went through my KK2.1.5 again and verified everything again it fly perfectly. Yes the arms have flex but I can deal with it. The landing gear could be better & I may swap it out or add to it to strengthen them maybe even add a battery holder to each side some how. I am using some cheap 800kv motors with 12.4.5 props to start with as I'm a novice then go to carbon fiber ones eventually. I am also running a EMAX 25amp 4in1 ESC in the quad as well as my F450 without issue. I have set this up for FPV and have Built my own Ground station and will post some videos of it soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This frame is not rigid and it vibrate with low KV motor and big propeller. In my case I have try it with 12 prop. Too much vibrations! The arms distords.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For me, It wont fly properly, the arm flex to much creating an unstable craft, it look like the KK2 is always figthing no mater what setting, same goes for the Naze32. I have swap everything to confirm my stating, motor, ESC and board. I have tried everything else. the only way to resolve that where to install smaller and stronger (450) arm. My 3 stars goes to the frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The arms are very weak and flexible. It can not even hold motors. When used with landing skid, arms become curved because of the motor weight. In addition, during flight, it sometimes shakes because of flexible arms. May be good with 22/28 size 0945 size props, where the shaking force is low.
Instead of this frame, you may choose another Hobbyking product; whose arms seem more rigid: http://www.hobbyking.com/hobbyking/store/__56209__Q680_V3_Glass_Fiber_Quadcopter_Frame_680mm_Integrated_PCB_Version.html
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Z700v-2

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.