New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Aluminium Quick Release auto-serrage Prop Adapter Set - 1 x 1 x CW CCW

Aluminium Quick Release auto-serrage Prop Adapter Set - 1 x 1 x CW CCW

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

8,33 €
Statut:
Backorder
SKU:
017000374-0
WANT FREE SHIPPING? Click here to find out more!

Êtes-vous fatigué d'enlever vos hélices pour transporter votre multirotor, pour passer plus de temps pour les remettre sur le moment où vous devriez être en vol? Maintenant, il y a un moyen plus facile. libération rapide auto-serrant adaptateurs prop.

Aucune hélices plus de rupture pendant le transport et moins de frustration avec une configuration rapide et facile. Cet ensemble a un chacun, CW et la rotation de CCW qui sont codés par couleur pour une identification facile.

Il suffit de monter votre hélice l'adaptateur et la base à votre moteur et d'un mouvement de l'hélice va se visser sur.

Transport et stockage de votre multirotor ne pouvait pas être plus facile.

Spécifications:
Poids: 13.5g chacun (boulons de montage inc)
Prop Shaft: 6mm
Moteur de trou d' arbre: 4mm
Trou de montage Diamètre: 12mm (4-point de montage)
Auto-Serrage Direction: 1 x Clockwise (rouge) 1 x antihoraire (noir)

Les boulons de montage et clé hexagonale inclus.

  • UGS 017000374-0
  • Brand Unknown
  • Capacité ( mAh ) -
  • Poids 36.0000
  • Longueur 45.00
  • Largeur 25.00
  • la taille 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

i purchased these to replace a broken prop adapter. they seemed very nice at first, but on the third flight during a manuver at about 50 meters, two of the props flew off the quad copter due to a quick change in speed of the motors, resulting in a crash. very difficult to tighten enough so that they don't unwind during sudden motor speed changes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i purchased these to replace a broken prop adapter. they seemed very nice at first, but on the third flight during a manuver at about 50 meters, two of the props flew off the quad copter due to a quick change in speed of the motors, resulting in a crash. very difficult to tighten enough so that they don't unwind during sudden motor speed changes.

Well I purchased these for my quadcopter and the first thing to note is these adaptors are missing corrugation where the prop itself sits on. They are smooth so you have to really tighten down the prop to get it from spinning freely. Second there is no way to hold onto the top adaptor to screw down the nut that tightens the prop down. Basically your trying to grip the round plate as tight as you can so you can even tighten down the prop. The last and major issue with these adapters is they fail very quickly. I had my quad only 5 feet off the ground fortunately but the top adapter on one of the motors sheered in half, so that prop basically just fell off and the quad crashed to the ground. I think the reason it sheared off is because the material is extremely thin, you can look at the aluminum and see there is barely any material holding the prop mounting post to the actual base plate.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well I purchased these for my quadcopter and the first thing to note is these adaptors are missing corrugation where the prop itself sits on. They are smooth so you have to really tighten down the prop to get it from spinning freely. Second there is no way to hold onto the top adaptor to screw down the nut that tightens the prop down. Basically your trying to grip the round plate as tight as you can so you can even tighten down the prop. The last and major issue with these adapters is they fail very quickly. I had my quad only 5 feet off the ground fortunately but the top adapter on one of the motors sheered in half, so that prop basically just fell off and the quad crashed to the ground. I think the reason it sheared off is because the material is extremely thin, you can look at the aluminum and see there is barely any material holding the prop mounting post to the actual base plate.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!