S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global

Système d'alimentation Micro w / GPS-7 Boîte de vitesses

Système d'alimentation Micro w / GPS-7 Boîte de vitesses

Now save enregistrer 0,00 € 0,00 €

7,20 €
Epuisé!
Rating:
Stock:
OUT OF STOCK
Poids
17 g
SKU:
GPS7

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Combinez

et économisez plus
acc
Description
du
Micro brossé système d'alimentation pour les voyageurs d'intérieur.
Caractéristiques:
Type: Brossé
Dimension: 16 x 7mm
Longueur de l' arbre: 5mm
Diamètre de l' arbre: 1mm
Poids: 3.3g
Courant max: 1.8A
RPM: 3V / 40,000rpm à vide
Prop suggérée: GWS 4530
Données de test;
Prop: GWS 5030
Tension: 3.3, 3.8, 4V
Courant: 0,76, 0,89, 0.93A
Watts: 2.508, 3.382, 3.72W
Poussée: 31, 36, 38g
Efficacité (g / m): 12,36, 10,64, 10,22
Prop: GWS 4530
Voltage: 3,8, 4V
Courant: 0,81, 0.87A
Watts: 3.078, 3.48W
Poussée: 32, 35g
Efficacité (g / m): 10,40, 10,06
Product
Specifications

Informations supplémentaires

  • Référence:
    GPS7
  • Brand:
    Non communiqué
  • Poids (g)
    17.00
  • Longueur
    68.00
  • Largeur:
    17.00
  • Taille:
    60.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Is used for electronically reversible radar screen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got two of these, and they weigh an average of 3.575g out of the packet. The prop shaft extends 18.5mm beyond the front face of the large gear. The prop bushing at the tip of the shaft is 7mm deep and has a 4mm diameter. GWS props with a 4mm ID prop hubs will press-fit nicely onto these. Both my units came with their main shafts feeling rather tight to rotate by hand. I connected the motor to a variable DC power source and powered them with 1V, slowly increasing it to 3V. Initially the no-load

current draw was 400mA. Left to run for about a minute like this, you can hear the revs go up, and eventually the no-load current was only 100mA. After that, the main shaft felt very easy to rotate by hand, it was no longer tight. I think the retaining bushing was pressed on too tight, but the above method was able to break-in both my units.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice and light motor/gearbox combo. While the power output with a GWS 5x3 is a bit less than stated it works well in my micro aircraft with a 130mAh 1S battery and the HK brushed micro ESC. The propeller fits well on the shaft adapter, but care must be taken to not bend the tiny shaft.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I like it! I am flying a 20g depron/mylar, rudder/elevator model using a gws 5x3 prop and a nanotech 130mAh cell and a vapor brick. Cruises on 1/2 power with excellent duration. Probably unsuitable for 3D?

Steve
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wonderful thing!

I added this to my Kyosho Minium 4 Ch, which was a bit underpowered right out of the box. I added a GWS EP Propeller (DD-5030 127x76mm) and now the plane works quite fine!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The small diameter (1 mm) is soft and very easily bent. That said, use of a homemade propsaver aids greatly. For the cost, a viable Indoor sport motor for my 21.5 gr. AUW foamies.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Much smoother than the 6mm unit but why the long shaft ? The prop adapter is very eccentric making the prop run way out of true. weight 3.3grams
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall


"You might find further reviews (displaced by s/w malfunction) on:



http://www.hobbyking.com/hobbycity/store/product_reviews.asp?idproduct=1000#review"



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The perfect parkzone replacement
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc