S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire

Commission de contrôle de vol MINI MWC et DSM2 Compatible Récepteur ACC / GYRO / BARO / MAG

Commission de contrôle de vol MINI MWC et DSM2 Compatible Récepteur ACC / GYR...

Now save enregistrer 0,00 € 0,00 €

30,22 €
Epuisé!
Rating:
Stock:
OUT OF STOCK
Poids
16 g
SKU:
9154000006-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description
du

Le Nouveau Mini MWC carte de contrôle de vol est jalon dans le progrès et l'ingéniosité de la plate-forme MWC. La combinaison de la puissance de l'ATmega328P avec Accéléromètre, Gyro, un baromètre et une boussole numérique avec un récepteur compatible à bord 7 canaux DSM2 (avec un bouton de liaison à bord!). Tous emballés sur un PCB de cuivre double qualité avec des connexions et de l'empreinte pas beaucoup plus grande qu'une grande pièce revêtue d'or! Le monde de la Mini Multi-rotors simplement pris à leur grand frère.

La plate-forme MWC propose une liste de blanchisserie de fonctions et disposent comme; stabiliser Auto, le maintien d'altitude, le mode simple et beaucoup plus, et avec l'option GPS disponible même flâne dans une position de jeu et revenir à des options à la maison! Vous pouvez même opter pour fixer un écran OLED en option pour la programmation facile et commentaires!

Caractéristiques:
• 7CH DSM2 Récepteur Compatible (PPM SUM)
• Vérification auto-tension
• FTD1 protection
• ATMEGA328P Microcontroller
• MPU6050 Accéléromètre et Gyro
• BMP085 capteur barométrique numérique
• HMC5883L Manomètre numérique / Compass
• C8051F330 MCU
• CYRF69103 Radio
• Ports double IIC
• UART
• Port GPS (GPS non inclus)
• Port d'écran OLED (OLED non inclus)

Les fonctions suivantes peuvent être réalisées grâce à la carte de commande de vol MINI MWC:
stabilisation -Auto
-Stabilize L'altitude
-Correction Rubrique cours
-Hovering À une position identifiée (besoins 12C-GPS carte convertisseur et supports par GPS)
vol -Retour automatiquement (besoins 12C-GPS carte convertisseur et supports par GPS)
-Et plus

MINI MWC vol carte pris en charge les modes:
-GIMBAL-Individuelle stabilisation de la tête du berceau
-SINGLECOPTER-VTOL seul axe
-BICOPTER-BICOPTER Avatar
-Tricopter
WING -FLYING
-VTAIL
avion -Correction aile
-4-Axis (QuadX, QUADP, Y4)
stabilisation de la tête -cradle / Cardan
-6-Axis (Y6, HEX6, HEX6X)

Options non inclus: (Stock sera bientôt)
-MX-FTDI outil clé de programmation
écran -OLED, peut être monté sur MINI MWC carte de contrôle de vol directement
-IIC À carte convertisseur UART, Il est pour changer le signal UART du GPS à un signal IIC
Module -GPS

Spécifications:
Taille: 47.7X23.5X11mm
Poids: 7.8g
Tension de travail: 5-8.4V

* Transmetteur pour MINI MWC carte de contrôle de vol doit soutenir DSM2 et 4CH ou au- dessus (nous recommandons 6CH ou au- dessus)

Product
Specifications

Informations supplémentaires

  • Référence:
    9154000006-0
  • Brand:
    Non
  • Poids (g)
    16.00
  • Longueur
    50.00
  • Largeur:
    10.00
  • Taille:
    25.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
This is a great little 250 racer controller. I had a heck of a time getting the channel order correct for my OrangeRX T6. I loaded it with MultiiWii 2.3
and modded the config.h file a lot. The channel order is odd being PITCH,YAW,THROTTLE,ROLL in the ppm_sum setting. Also, I was able to get the buzzer and VBAT working great. I will try to post my config.h file and hardware mods to the files section.
Quality
Value
Overall
Quality
Value
Overall
This is actually a lovely little board, it's just that it's NOT a plug and play kind of thing. If you're good with microcontrollers and electronics, then you're gonna do just fine. You need to get the little JST connectors and hook it up to an FTDI board and at the very least re-program it with the latest MultiWii software. Since the board lacks a DTR pin to automatically reset the CPU (for activating the bootloader) it's imperative that once you click "UPLOAD" on Arduino that you time it such that you power up the board (by plugging the serial adapter in to the board) such that it comes to live a second or so before the code starts to push out of the FTDI. Obviously, you can't do this by plugging the USB in to and out of the computer, as Arduino would have to re-enumerate the ports, etc etc, so make and break the connection between the FTDI and flight controller. You also have to upload the right setup of firmware. See (and set up) the config.h file in the Arduino firmware. Download it directly from Multiwii. The how-to and particulars of the code are out of scope of what I feel like talking about right now. Sorry. You're smart, you can figure it out. I will say this... It likes to fly backwards, so keep that in mind.

But yeah, all the nay-sayers, give it another chance. This board is fine, you just don't know what you're doing.
Quality
Value
Overall
Quality
Value
Overall
This board is absolute garbage. I have spent months researching and tuning this board to perfection....there is NO vibrations, even used the low pass filter. ESC's calibrated 20 times, eprom's wiped, etc. ,etc... after a minute, it will just DROP from the sky. There is nothing I can do to fix it. I have read EVERY thred, EVERY post, and EVERY review. (yes leocopter too) And this board WILL NOT fly reliably. At some point during flight it will just DROP to the left and crash. GARBAGE!!! Multiwii is also a dieing trend. Sure it has a lot of features (that no one seems to ever get working right) operating systems like open pilot, and other easy to use interfaces. So put it like this, you can buy a small toy quad (hubsan) for about the same $, and it flies AWESOMELY!! You put this board in anything, you are looking at LONG hours becoming a computer programmer just to never get it to work right. I know many other boards have great reviews...but NOT this one!! GARBAGE!
Quality
Value
Overall
Quality
Value
Overall
This is a very good FC. Not easy to set up, but well worth the effort if you want the ultimate tiny MultiWii board !
This is how I set up my Mini MWC boards (after a lot of tinkering ...):
1- Building an interface between your FTDI usb board and the flight controler is quite simple : solder the 4 leeds of the 'mini micro 4 pin 1.25 T-1 JST connector' cable (the same one used on the Neo 6-M GPS module - SKU: 387000004) to a 6 pin header (GND, 5V, Rx, Tx). Solder an extra wire to GND. On the other end of the wire, solder a probe (I my case a 1 pin header with heatshrink tubing). You will need this probe to put the 328P in programming mode. Make sure Rx goes to TX and vice versa.
2- Plug you new interface cable to the board (or power the board via the output headers - D3 to D11) while pushing the bind button (the one on the top circuit board where the antenna is soldered). The red LED will blink rapidly. You are now in binding mode. Turn on your DSM2 compatible transmitter while pressing on its bind button (if you have a ORX orange DSM2 module). The LED on the Mini MWC will stop blinking then will stay on. It is now binded to your Tx.
3- In Arduino load the MultiWii shetch and select the HK_MultiWii_SE_V2 board. Its is fully compatible with the Mini MWC (you get the correct sensor orientation). Also make sure you uncomment #define SERIAL_SUM_PPM. If you plan to use an OLED display
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.