S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA

TURNIGY de Bell 2409 1600kv Outrunner

TURNIGY de Bell 2409 1600kv Outrunner

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
87 g
SKU:
TR_2409_1600
Description
du

Le moteur TURNIGY de cloche ressemble et fonctionne exactement le même que le Towerpros, à 2/3 du coût!

Turnigy de Bell 2409 1600Kv

Poids: 56g
Tension: 10v (2 ~ 3 cellules pack lipo)
Idle actuel: .9
Kv: 1600
Shaft: Diamètre 3mm
Max efficace courant: 15A
Max charge: 20A
Puissance de sortie: 180W
Suggérée Hélice: 9x3.8 E- Hélice

* Ce n'est pas faite par towerpro.

Product
Specifications

Informations supplémentaires

  • Référence:
    TR_2409_1600
  • Brand:
    Non communiqué
  • Poids (g)
    87.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
  • Kv ( rpm / v)
    1600.00
  • Max Currents (A)
    20.00
  • (W ):
    180.00
  • Longueur B ( mm ):
    37.00
  • Longueur Can D ( mm )
    12.00
  • Max Tension (V)
    10.00
  • Arbre A ( mm ):
    3.00
  • Unit Weight (g):
    56
  • Diamètre C ( mm )
    31.00
  • Longueur totale E ( mm )
    64.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Katalog bilgileri dahilinde kullanlabilir bir motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
With Towerpro 8x3.8 prop and Turnigy 3S1800, I measure 10.6 volts, 26 amps, 277 watts. A pleasant surprise since it's more power than the similar Towerpro motors, but a little disappointing since I was using a 25-amp controller! Controller got warm and cut out, should be OK. This is one of my favorite battery/motor/prop combinations, I'll see about getting some 30-amp controllers.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice motor good and economic
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Superior engine for small money.

Works very well and has a lot of power.

It is much better prepared and better than the same product TowerPro.

5 stars!

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I give this motor 5 starts becuse of how powerful it is but DO NO use any bigger prop then 7x5 or your frie ur motor as i did to two of mne :P sucked , but theres a looooooad of poer in this baby.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i made a set up for my axn floater and because i don't have the choice I use this motor with a 6x4e prop with 4s 2200 zippy and give me a good performance at 245watt and 15 A at full trottle but anyway the motor have enougth cooling so for now leave it like that but if can find a 2200kv motor will be better !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
als Alternative zum Towerpro

2409-12T

noch nicht getestet.

Qualitativ guter Eindruck !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Energy saving motor when use it on 7x6E to fly parkjet. you can easily fly 8-10mins with 2200mah 3s. But the shaft is unchangeable making it less perfect
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
TGS 8x4E, 3S 1300 Turnigy 20C, Tower pro 40A - 200W for F4U fighter "pirate" or ME-109 from HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The magnets are strong and seems like stopping the bell from rotating easily. But checked again and powered it with 2200mAh 2S Lipo. The motor runs fine. Nice product for the price.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.