S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Turnigy DLUX 30A SBEC Brushless Speed ​​Controller w / Data Logging (2s ~ 4s)

Turnigy DLUX 30A SBEC Brushless Speed ​​Controller w / Data Logging (2s ~ 4s)

Now save enregistrer 0,00 € 0,00 €

19,75 €
Epuisé!
Rating:
Stock:
OUT OF STOCK
Poids
40 g
SKU:
9192000027

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Combinez

et économisez plus
acc
Description
du

Turnigy® Dlux SBEC CES ont établi un nouveau point de repère dans la qualité et la performance, si bien que cette ESC léger et très polyvalent peut gérer jusqu'à 4s et + 10A éclater de courant avec une totale tranquillité d'esprit. La programmation et l'enregistrement des données de nombreuses caractéristiques offrent également une polyvalence des applications rarement vu dans un ESC de cette note. Tous les CES Turnigy Dlux peuvent être programmés via une carte de programmation ou par l'émetteur. Des instructions claires et faciles à comprendre sont inclus.

* Maintenant, avec l'enregistrement de données visibles lorsqu'il est utilisé avec la boîte de programmation Turnigy DLUX.

L' enregistrement des données d' affichage des paramètres:
Température maximale
Environnement Température
Max actuel
courant min
tension maximale
Min Voltage
Tension nominale
tension,
Motor Run Time
Puissance sur le temps
Moteur Nombre Pole
RPM Max Motor
Temps d'erreur

Spec.
Max Cont. : 30A
Max Burst: 40A
Max BEC: 2A
BEC Voltage: 5.5v
LiPo: 2 ~ 4S
Poids: 23grams
Max RPM (2 pôles): 200,000rpm
Taille: 51 x 27 x 11mm
Branchez Moteur: bullet connecteur 3.5mm Femelle
Branchez la batterie: Néant

Caractéristiques.
• Très faible résistance interne
• La température très basse de fonctionnement
• Protection contre la surchauffe
• APEC MOSFET (Taiwain)

Options de programmation.
Type de batterie: 2S 4S ~
Avant / Arrière
Démarrage en douceur
LV Couper type (Ignorer, Réduire Power, Arrêt du moteur)
LV Coupez réglage (2,5 ~ 3.5v par incréments de 0,1V)
Timing (Auto, moyen, élevé)
Commutation (8,16kHz)
usine de restauration
Contrôle RPM actif: On / Off (Mode gouverneur)

Réglages d'usine par défaut.
Brake: off
Batterie: LiPo Détection automatique
Low Voltage: 3.2v (mise hors tension du moteur)
Timing: Auto
Fréquence: 8 KHz

Remarque: la boîte de programmation maintenant disponible, vérifiez les éléments connexes ci - dessous.

Product
Specifications

Informations supplémentaires

  • Référence:
    9192000027
  • Brand:
    Turnigy
  • Poids (g)
    40.00
  • Longueur
    115.00
  • Largeur:
    10.00
  • Taille:
    100.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
very nice esc. works perfectly. I haven't used the logger. but, don't intend to..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a nice little esc. running a 2826 with an apc7x4 pusher on 3s. works perfectly. operates cool!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Installed one into my Super Zoom XL. Setup is a SK3 3530-1100kv, 12x6 prop, 3S packs, DS929MGs on the ailerons and MG16s on the elevator and rudder. Orange 6-channel RX w/ satellite. Throttle response seemed laggy. I guess I missed the part in the description where the BEC is rated at 2A, because ~1 minute into the first flight the plane locked out and flew into the bush. Blinking rx lights indicated power loss. Oops! After repairs I swapped in a beat-up CC Thunderbird-36 and all has been well since.
BTW the datalogging features work... make sure you have the current version (v2.1 or greater) of the programming box, as the older boxes do NOT recognize this controller.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wonderful product and as long as you spend a little extra for the programming box, this thing is amazing! 23.5 grams all up weight after I soldered on some micro 2mm gold connectors on the input leads.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using this esc in my funfighter bf109 because the original esc burnt out after 6 flights(20a) and it pulls 23a !!!

8 flights upto now and going strong
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is the first ECS I have and it runs perfectly, I would recommend it.
But it is the first one iv used so I don't have anything to compare it to.
I put it in the Bixler 1.1 and with in the week iv had over 20 flights with it.
I got the dlux programming box and it is very easy to use even for a first one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This ESC is amazing, I plugged it in the wrong way (more than once) and iv had no issues with it. As a real new guy to the hobby I dont have much to go on,. but with my experience in electronics the fact it survived such a stupid mistake then its got to be worth a go!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The ESC is awesome, much lighter than my HK red brick one, though the heat has something to do with that. Now I just need to get me that program box to use the data logging feature
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got one and it survived an accidental brief reverse connection!!
One aspect which I am not too pleased with, is the fact that to gather the data you will need to disconnect the connection to the receiver.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Big build up for a dissappointment this speedie needs the new programing box doesn't work on old V 1.0 instructions not accurate for transmitter and program box setup, works well in aeroplane mode except for soft start,but in heli mode even at throttle 100pcnt you only get 35 to 40pcnt rpm from motor, soft start in heli mode very slow,. but top speed in heli mode not enough. data logging works well.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Delux 20A & 30A ESC

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Customer files
No File Name Télécharger maintenant [5098kb]

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.