S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

XK2445-3500KV Brushless Inrunner

XK2445-3500KV Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
93 g
SKU:
9393000009
Description
du

XK2445-3500KV Brushless Inrunner

Specs.
Nombre de pôles: 4
Max Amps: 28A
Max Volt: 8.4V
Max Watts: 235W
Rpm / V: 3500kv
Résistance: 0.056 ohms
Aucune charge actuelle: 1.9A
Dimension: 24mm x 45.0mm
Montage profondeur du trou: 4.5mm
Longueur de prolonger l' arbre: 11mm
Diamètre de l' arbre: 0.3mm
Poids: 75.6g

Product
Specifications

Informations supplémentaires

  • Référence:
    9393000009
  • Brand:
    Non
  • Poids (g)
    93.00
  • Longueur
    70.00
  • Largeur:
    25.00
  • Taille:
    35.00
  • Kv ( rpm / v)
    3500.00
  • Max Currents (A)
    28.00
  • (W ):
    235.00
  • Longueur B ( mm ):
    45.00
  • Longueur Can D ( mm )
    43.00
  • Max Tension (V)
    8.00
  • Arbre A ( mm ):
    0.30
  • Unit Weight (g):
    75.6
  • Diamètre C ( mm )
    24.00
  • Longueur totale E ( mm )
    57.00
  • Résistance ( mh ):
    56.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
not direct fits for 1/16. mounting holes will not lign up with your 1/16 models.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bought 3 of them. 2 for kyosho blizzard (it has very momentary transmission) so it is ok.
but x-ray m18t pro with this motor and big wheels and 15t pinion starts with difficulties though another motor ~18t starts ok. so it is sad for me. I suppose that this motor has ~10 turns and cannot be used in 1/18 truggy and monsters.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
MOTOR NOT USABLE OUT OF THE BOX. Exactly as Whipper snapper, bought two of these motors and they both aren't spinning free because the rotor is too tight between the bearings. I tried to open it to try and solve this problem myself but the two phillips screws are impossible to unscrew, I am worried I'll strip the head and end up doing a butcher job just to make the motor usable. I'll come back for an update when I get the time.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought the motor and found that the rotor is rotating too tough. The size of rotor is large so bearins are blocked. Bad quality. Motor heats up very quickly. Working only on 2S to get full power. 3S block my ESP at full power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Brought 2 of these used one for replacement motor on my Centurion Mini catamaran old one being a 3000kv finally died after 2 years of hard runs...this was a great replacement feels a bit faster but glad made the purchase not over-heating problems def recommend it for the Centurion...i running 35amp esc with 25c 2200mh 3S pack
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

D'autres personnes ont tagué ce produit avec :

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.