New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Y-3 en fibre de verre Tri-Copter Cadre (KIT)

Y-3 en fibre de verre Tri-Copter Cadre (KIT)

Discontinued Product

Please continue searching for a similar product.
SKU:
9108000005
WANT FREE SHIPPING? Click here to find out more!

Vous cherchez quelque chose de nouveau dans le monde multi-rotor? Eh bien voilà!

Juste quand vous pensiez que tous les cadres multi-rotor ressemblaient ... Y-3 est apparu sur la scène et se brise toutes les règles! Avec la construction en fibre de verre avec couche de renforcement, le Y-3 est super rigide et léger. Son travail de peinture à haute brillance est impressionnant à regarder ce qui en fait vraiment se démarquer dans l'air.

Ceci est la première fibre de verre Y-3 multi-rotor cadre sur le marché aujourd'hui et est tout à fait unique. Il ne manquera pas de faire tourner les têtes sur votre site de vol local. Il dispose même des rainures de fixation pour bandes lumineuses à LED sur le dessus et le bas, le rendant parfait pour l'installation pour le vol de nuit aussi bien!

Le Y-3 arrive en kit avec tout le matériel nécessaire inclus. Vous aurez simplement besoin d'ajouter vos propres moteurs brushless / CES, multi-rotor carte de commande, micro servo arrière et la batterie LiPoly. Le Y-3 est la plupart du temps pré-construit rendant rapide et facile à obtenir dans l'air.

Caractéristiques:
• Construction en fibre de verre plein-corps unique
• Belle brillant travail de peinture
• la conception du corps complet fait pour faciliter l'orientation en vol
• Montage Tout métal pivot queue moteur
• rainures de montage de bande LED

Spécifications:
Largeur: 525mm (centre de l' arbre moteur pour centrer entre les bras avant)
Longueur: 550mm
Poids du cadre: 460g (w / out électronique)
Poids en vol: 900 ~ 950g (w / out batterie)

A besoin:
28-XX moteur brushless outrunner x 3
25 ~ 40A brushless ESC x 3
Haute vitesse micro servo pour la queue x 1
8x4 ~ 10x4.7 hélice x 3 (2 norme de rotation / 1 inverse)
Multi-rotor carte de commande
2200mAh 3S batterie LiPoly
émetteur et le récepteur 4CH

  • UGS 9108000005
  • Brand -
  • Capacité ( mAh ) -
  • Poids 1767.0000
  • Longueur 605.00
  • Packaging Width 170.00
  • la taille 525.00
  • C3 Y3 Tricopter fibreglass
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

very crazy build, tuning the FC was a bit tough but so worth it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very crazy build, tuning the FC was a bit tough but so worth it

Das Design ist Klasse, man kann die Fluglage sehr gut erkennen. Mngel konnte ich nicht feststellen. Klebungen, Mechanik und Lackierung ist alles in Ordnung bei meiner Lieferung.
3* Turnigy Aerodrive SK3 - 2836-1040kv, TGY-306G-HV High Voltage Ultra Fast/High Torque MG Digital Alloy Cased Servo, 3000 - 3600 mAh 3S. Hobbyking KK2.1.5 board
Es ist mein erster Multicopter und ich bin begeistert, kann ich nur weiter empfehlen !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Das Design ist Klasse, man kann die Fluglage sehr gut erkennen. Mngel konnte ich nicht feststellen. Klebungen, Mechanik und Lackierung ist alles in Ordnung bei meiner Lieferung.
3* Turnigy Aerodrive SK3 - 2836-1040kv, TGY-306G-HV High Voltage Ultra Fast/High Torque MG Digital Alloy Cased Servo, 3000 - 3600 mAh 3S. Hobbyking KK2.1.5 board
Es ist mein erster Multicopter und ich bin begeistert, kann ich nur weiter empfehlen !

Frame is not well made. No instructions for anything.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Frame is not well made. No instructions for anything.

Quality is brilliant , light well built .. would be nice if it was available as a PNF :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quality is brilliant , light well built .. would be nice if it was available as a PNF :)

Flyes perfectly with a lot of power, with the following components: TGY-306GHV Servo, KK2.0 Multirotor Control Board, 800KV Brushless Motors, Turnigy Multistar 45Amp ESC's, 10x5 Props. RH rotation, or 10x4.5 Props RH rotation,blue LED strips meets perfect for a good looking Tricopter.
7 minutes flys with 4s 2200mah and 12minutes with 4s 4000mah
https://www.youtube.com/watch?v=IOR2wJpv9nc&feature=youtu.be

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flyes perfectly with a lot of power, with the following components: TGY-306GHV Servo, KK2.0 Multirotor Control Board, 800KV Brushless Motors, Turnigy Multistar 45Amp ESC's, 10x5 Props. RH rotation, or 10x4.5 Props RH rotation,blue LED strips meets perfect for a good looking Tricopter.
7 minutes flys with 4s 2200mah and 12minutes with 4s 4000mah
https://www.youtube.com/watch?v=IOR2wJpv9nc&feature=youtu.be

Oooo!!! A beauty. Have one and i might say that is a very good balanced frame, offering a lot of space for big motors like the hexTronik DT750 Brushless Outrunner 750kv, easy access to flight controller and battery compartiment. Overall a Beauty!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Oooo!!! A beauty. Have one and i might say that is a very good balanced frame, offering a lot of space for big motors like the hexTronik DT750 Brushless Outrunner 750kv, easy access to flight controller and battery compartiment. Overall a Beauty!!!

Okay, I have a small issue with this bird, and it appears that many people have small issues with it. So, quality could be improved. Having said that, I love this bird! She's the new queen of the fleet, and I'm finding myself spending lots of time with her. I've loaded the FC up with MPNG, made a homemade platform for the GPS module, which looks very stealthy, mounted 505 RGB LEDs top and bottom, with a controller on a separate 350 mAH battery, Turnigy Aerodrive D2830-11 1000kv motors, which are adequate, if not stunning as far as power and speed goes. And the de riguer TGY-306G-HV servo at the yaw. I've also cannibalized my Hubsan X4 for it's HD camera, which is mounted at the fore. Pretty tricked out, and I'm probably not finished. I also plan to add nav lights, beacons and strobes. I might also mount some lasers...no, I'm not kidding...muahahahahahahaha!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Okay, I have a small issue with this bird, and it appears that many people have small issues with it. So, quality could be improved. Having said that, I love this bird! She's the new queen of the fleet, and I'm finding myself spending lots of time with her. I've loaded the FC up with MPNG, made a homemade platform for the GPS module, which looks very stealthy, mounted 505 RGB LEDs top and bottom, with a controller on a separate 350 mAH battery, Turnigy Aerodrive D2830-11 1000kv motors, which are adequate, if not stunning as far as power and speed goes. And the de riguer TGY-306G-HV servo at the yaw. I've also cannibalized my Hubsan X4 for it's HD camera, which is mounted at the fore. Pretty tricked out, and I'm probably not finished. I also plan to add nav lights, beacons and strobes. I might also mount some lasers...no, I'm not kidding...muahahahahahahaha!

i love this model it fly great i put the k2.1 board and 3 e flight 400 motor in it with 3 turnigy 30 amps speed control... As for the build not too bad i got in done in no time the only thing i wish it had was a back cover to hide the motor in the back but for the price no worries thanks hobbie king good job on this one..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i love this model it fly great i put the k2.1 board and 3 e flight 400 motor in it with 3 turnigy 30 amps speed control... As for the build not too bad i got in done in no time the only thing i wish it had was a back cover to hide the motor in the back but for the price no worries thanks hobbie king good job on this one..

Kit looks very good on the first view.
But on second view shows poor quality. The bulkhead for the tilt mechanism was glued in twisted. You need to install a spacer on one side (6-7mm) to get the tilt mechanism installed properly. In addition, the alloy bulkhead and motormount of the tilt mechanism are miss machined.Only one bore to install the motor. The other 3 are not cut properly.

In sum, a lot of rework needed to get all the quality issues fixed.
Hk, you need better quality inspection

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kit looks very good on the first view.
But on second view shows poor quality. The bulkhead for the tilt mechanism was glued in twisted. You need to install a spacer on one side (6-7mm) to get the tilt mechanism installed properly. In addition, the alloy bulkhead and motormount of the tilt mechanism are miss machined.Only one bore to install the motor. The other 3 are not cut properly.

In sum, a lot of rework needed to get all the quality issues fixed.
Hk, you need better quality inspection

Received my C3 tricopter and I am very impressed.It is lightweight strong and well thought out I am installing the electronics and can not wait to fly it.
I hope all the team at Hobbyking have a great holiday season,thanks for another great value product and long may it continue happy flying everyone
and all the best for 2014.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my C3 tricopter and I am very impressed.It is lightweight strong and well thought out I am installing the electronics and can not wait to fly it.
I hope all the team at Hobbyking have a great holiday season,thanks for another great value product and long may it continue happy flying everyone
and all the best for 2014.

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
Poor bulkhead installation Download [279]
Inpropper machining motor mount Download [396]
Impropper machining alloy bulkhead Download [239]
Yaw mechanism assembled with Corona919 Download [1960]
tricopter Download [3086]
TailDev Download [70]
CG test Download [2942]
Y3 tail servo tgy-306g Download [3065]
side view of tail servo Download [3029]
stock canopy underside Download [3117]
  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save