Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy TR-55 55CC Motore a Gas 5.6HP

Generating Links

Turnigy TR-55 55CC Motore a Gas 5.6HP

Prezzo:

Now save risparmia 0,00 € 0,00 €

246,81 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9477000002-0
Spedizione gratuita? Clicca qui per saperne di più!

Il motore Turnigy TR-55 racchiude un punzone da 5.6HP e include una manovella in lega di billette interamente lavorata, valvole lamellare ad alta potenza e porte per una coppia elevata! Il case in alluminio billet lavorato è resistente e leggero, che combinato con la potenza che emette rende il TR-55 perfetto per i tuoi aerei 3D e acrobatici di classe 50-55CC. Poiché il TR-55 funziona con la normale pompa a gas, i costi operativi sono bassi e il fattore divertimento alto.


Caratteristiche:
• Cassa in alluminio billet con testate cilindri in fusione di sabbia
• Accensione elettronica CDI
• Include silenziatore compatto


Specifiche:
Cilindrata: 55.64cc
Prestazioni: 5.6hp a 7500 giri/min
Inattivo: 1500 giri/min
Puntello suggerito: 22x8, 23x10
Candela: (CM6)
Alesaggio/corsa: 45 x 35mm
Carburante: 2C Normal Gas misto 30:1 (rodaggio) - 40:1 (volo normale)

  • unboxing
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Graydon | Acquirente verificato

  • Overall
  • Quality
  • Value

Incorrect carby fitting

Apr 25, 2022

The carby to reed valve fitting is incorrect. There is a gap between these ,the face of the carby is to small for the reed valve block assembly. This alows air to enter and the engine will not idle.
I have made a plate to fit between these that seals the passage.To see this fault you need to remove the cap with the big screw in it .

Serju | Acquirente verificato

  • Overall
  • Quality
  • Value

Very strong

Jan 10, 2022

Very strong, runs well even at running in phase. Easy to adjust .
Could be a little better finished, regarding casting and some flashes. Best buy at this size !

thierry | Acquirente verificato

  • Overall
  • Quality
  • Value

Incomplete after-sales service on dispute declare

Nov 24, 2021

Engine incorrectly fitted at the factory, central propeller fixing nut It was loosened on first use which caused the fixing bolts in the propeller plate to break. After complaint we received the front washer and the 4 bolts but not the damaged propeller plate.
So still waiting for the propeller part to be able to use it.

Jean-Francois | Acquirente verificato

  • Overall
  • Quality
  • Value

Very bad motor

Oct 25, 2021

Impossible to adjust correctly iddle and hight with the screw. How I regret my DLE 55!!

JFJ | Acquirente verificato

  • Overall
  • Quality
  • Value

Moteur très décevant loin de la qualité de fonctionnement du vrai DLE55

Oct 24, 2021

Impossible de régler correctement ce moteur. Si le moteur tourne bien, le lendemain il faut reprendre les réglages. Et même dans la même journée il faut reprendre les réglages. Le moteur est rodé et j'ai mis une bougie de qualité.
Impossible d'utiliser ce moteur sur un avion.

Monroe | Acquirente verificato

  • Overall
  • Quality
  • Value

Curious things worth mentioning I've noticed on the new 55CC gas engine I purchased.

Oct 22, 2021

First, let me state I just today decided to leave a review, and then coming to Hobby King I found less than two weeks from my invoice date of 10/06/21, for purchase of the 55CC gas engine, it has been discounted by $35.45, it might have been discounted the day after my invoice. I'm disappointed that I was not included in the discount given so soon after my purchase.
Now for the review; I have not ran the engine as yet, I have mounted a PK 22-8 propeller while doing so and noted the propeller bolts run through the hub and without tightening them they make contact with the inner hub where the ignition magnet is installed. Looks like I will have to shorten the propeller bolts by as much as 3mm before I tighten them properly.
Additionally, I notice a "slack" in the piston action. If rotating the propeller with the spark plug and muffler removed, placing a finger lightly on top of the piston for a little resistance, there is a definite click in either direction of rotation, I presume caused by loose clearance of the rod either on the wrist pin or the crank shaft. The bearings feel smooth, but this "click/slack" concerns me. I plan to update this review after successfully running the engine.
If after getting some satisfactory airtime with the engine I will increase the rating I've given.

BP | Acquirente verificato

  • Overall
  • Quality
  • Value

TURNIGY 55 CC

Sep 04, 2021

Excellent value for the money.
Started easy runs really well .
It's turning a 22x10 prop in my Edge 540
Vertical performance is Amazing.

Jan-Roger | Acquirente verificato

  • Overall
  • Quality
  • Value

Super!!

Jul 24, 2021

Started right out off the box.... and running strong with a 22x10 wooden prop...no adjustments so far...change the vakum tube with a longer one,because the original one is to short. With the orignal tube mounted you get a kink in it so the carburettor get no vacum to the fuel pump/membrane on top off the carburettor, therefore fuel starvation of fuel on low rpm/idle. Put in a longer vakum tube with no kinks on and engine runs beatifull! :-)

Gregory | Acquirente verificato

  • Overall
  • Quality
  • Value

Garbage

Jun 17, 2021

As you can see with other reviews it won't idle. It has an air leak and I can tell you exactly where. The two engine halves are screwed together and sealant in between. Mine spews fuel from the seam. Runs good as long as you never want to land your plane because is won't idle. So what to do ship it back get another terd. Hmm probably toss it in the junk bin and call it a waste. Should have bought the DLE.

Oldrich | Acquirente verificato

  • Overall
  • Quality
  • Value

Stojí to za h....Motor jde jen ve vysokých otáčkách a dělá si co chce .

May 01, 2021

Motor sám nenasaje palivo .Po dodání paliva do karburátoru jde jen ve vysokých otáčkách a dělá si co chce . Absolutně nepoužitelné . Netěsnost sání jsem nezjistil .
Vyměnil jsem i karburátor a je to stejné .

  1. 1
  2. 2
  3. 3
  4. 4
File dei clienti
Manual Download [735]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori