二つのCW / CCWモーターズのDYS 1804-2300KV BXシリーズセット

• Overall
• Quality
• Value

Customer Rated

Apr 01, 2016

I bought 4 of those motors to use with BLHeli 16 ESC on my kingkong188.
There works perfectly with 4" prop. I use it in 3S setup and 4S setup as well. They don't get really warm and all are still working after many flights

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 24, 2016

Super nice motors, they work very well on my Tarot 200 mini quad racer

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 30, 2015

I bought these for my first project, and to be honest the main factors for me getting them were quiet simple cheap and they fit, unfortunately one did arrive with a stiff bearing, that apon first flight got very hot so down it came... Still waiting on returns feed back, I live in hope

• Overall
• Quality
• Value

Customer Rated

Apr 06, 2015

Surprisingly nice motors for its small size. I tested with an amp meter and with 4 of these swinging 5030 gemfan props they drew about 8-10 amp while hovering my 530g quad at about 55pcnt throttle with all onboard electronics. At full throttle it drew about 14 amp. I've no idea how much thrust it had at full but it was more than enough for nice punch outs. I even tried it with 6030 hq props and the motor was fine. Ran a bit hot with a bit higher current draw, so I wouldn't recommended it as 5in gave it plenty of thrust for its size already.

Overall seems like a very efficient power platform for mini-quads

also just FYI the white prop nut is ccw (R props) and black is cw (normal props).

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 18, 2015

non dimenticare di prenderne una coppia di scorta per le vostre gare quad 250

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 14, 2015

I use this motors in my quad. It's awsom.

• Overall
• Quality
• Value

Customer Rated

Jan 05, 2015

it hasn't been to long since ive installed these. I did have one decent crash and the magnets don't seem as strong as they were but ill keep an eye on it. I reversed and flipped my hk 5030 carbon fiber props and put it on my scale for a quick thrust test and I got about 245g of thrust per motor. this is on 3s 1300mah zippy compact, again don't take my measurements to heart because I haven't gotten to fully test them with a watt meter and give it a good flight test after the crash because the snow just started, just wanted to give everyone a base to work off of because I could not for the life of me find any decent info on these anywhere.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 01, 2015

aka wage dejja gathhha jaj jhodani nathnam kekawenawa

• Overall
• Quality
• Value

Customer Rated

Dec 21, 2014

1 with bad bearing out of the box. it spins but stops quick, screams and motor gets hot within seconds.