新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • USA

リード2.7.2でマイクロHKPilotメガマイクロサイズのフライトコントローラとオートパイロット(APM)

リード2.7.2でマイクロHKPilotメガマイクロサイズのフライトコントローラとオートパイロット(APM)

QTY:

Now save save AU$0.00 AU$0.00

AU$65.93
Stock:
重量:
35 g
SKU:
387000063-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
商品概要

HKPilotメガマイクロはすべて同じパワーとその兄貴の機能を備えた完全なオープ​​ンソースの自動操縦と飛行制御システムです。

新しいHKPilotマイクロは、利用可能な他の場所で、以前の亜種の既知の問題にすべて同じ偉大な修正でHKPilot 2.7アーキテクチャに基づいています。それは創造今人気の35ミリメートルのフォームファクタにはるかに小さいフォームファクタに再設計され、まだ元の完全な機能とポートを保持しています。 HKPilotは急速に進化し、洗練されたArdupilotメガまたは「APM」、3DRのロボットからのオープンソースプロジェクトに基づいています。この驚くべきフライトコントローラは、ユーザがタスクであっても中間地点でGPSのミッションをプログラムし、フォローの広い範囲を実行することが可能な任意の固定翼、回転翼、またはマルチローター車(でも船や車)完全に自律走行車への、有効にすることができます(オプションのGPSモジュール付き)私の能力。

様々なユーザインタフェースは、ログ、スマートフォンやタブレットのためにも、いくつかのアプリを見直し、プログラミングのために利用可能です。オプションのテレメトリラジオはあなたに完全な制御を与える双方向の無線通信を可能にし、お使いのパソコンやタブレットに戻ってライブデータを提供します。何のことはできないとこのフライトコントローラが可能であるもののリストがすぐに機能、飛行モードおよびサポートされるプラットフォームで、上回りました。 APMプロジェクトは、利用可能な最良のシステムの一つであると、このオープンソースのフライトコントローラを押して何千人ものユーザーによって支持されています。

新しいHKPilotのMEGAマイクロ小型軽量化車両を考慮して、その兄貴が、サイズと重量から何も失いません。ミニはHKPilotsの進化のちょうど一歩です。

特徴:
•Arduinoの互換性
•プレ半田付けし、試験
•3軸ジャイロ、加速度計、磁力計および高性能バロメーター
•自動データロギング用の4 MPデータフラッシュチップに内蔵
•ハネウェルHMC5883L-TRデジタルコンパス
•インベンセンスの6自由度の加速度/ジャイロMPU-6000
•測定特産MS5611-01BA03気圧センサー。
•アトメルATMEGA2560とATMEGA32U-2(処理及びUSB機能)。
•マイクロUSB
•外部コンパスのサポート
•GPS入力
•IIC入力
•電源モジュールの入力
•テレメトリラジオ、OSDと対気速度センサーポート

仕様:
外形寸法:35x35x5mm
重量:5.3グラム

含まれています:
HKPilotメガマイクロ2.7.2
12ピンケーブル* 1
10ピンケーブル* 2

この製品は3DRロボティクスからオープンソースのAPMプロジェクトに基づいており、クリエイティブコモンズライセンスあたりのCADファイルは、ファイル]タブの下で利用可能です。

*注:これはオリジナルのArduinoのブランドの製品ではありません。

Product
Specifications

追加情報

  • 単位:
    387000063-0
  • Brand:
    N/A
  • 重量(g )
    35.00
  • 長さ
    95.00
  • Width:
    15.00
  • 高さ:
    65.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Despite the fact that you are stuck with older arducopter firmware, this is still a really neat flight controller. The small size makes it practical in situations the original APM was not and the price is good for what it is. My biggest complaint is the wiring, I had to do a lot of splicing and dicing to make everything work with my setup. It works great once you get everything setup and tuned though. There are plenty of youtube videos / websites about the APM, so it's easy to find solutions to common issues.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I replaced a old APM 2.5 from 3DR with this and couldn't be happier. The form factor is much easier to work with and I'm already familiar with the configuration. It's almost a drop in replacement for the APM 2.5, except you will have to make cables for the 3DR power module, Telemetry/OSD, and possibly GPS. Once you get all the cables made, it works exactly the same. I just use this thing for Stabilize/Althold/Acro and it does that very well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Might be worth noticing that this APM does not work with latest ArduCopter 3.2.1, but rather with 3.2 only. It is a setback especially since it took me half of weekend to figure out why there is no real feedback from the board (compass, gyro, RC stuff not moving while plugged to USB). Once I updated to ArduPlane firmware and confirmed everything works, I was able to single out the firmware as a problem.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to set up, build quality looks and feels solid. I have everything all hooked up and ground tested, now for a maiden flight! I am impressed so far1
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Everything is as advertised except the barometer is very glitchy and will not hold altitude. Vibration levels are well within acceptable limits, but the baro will still put out very large spikes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After some days of test I have return the board to HobbyKing.
The board after a while became extremely hot , around 60 Celsius
I add a little heat disspator on the two IC between the Usb port and the reset button and solve partially the problem but the board was very difficult to tune .
I had to always to trim a lot at each flight, there were oscillations impossible to eliminate with PID tuning.
Alt Hold did not work well even if there was a low vibations level, but the baro test report 42Celsius while the room temp was 19, do not know if that affects Alt Hold.
Then the compass stop to work and I decide to return the board.
My quad was a 250 mm class with 5040 props and a AWU weight of 170 - 230 grams (with Mobius camera).
I have mount on the same frame and setup a standard APM board and if flew perfectly without any tuning at first try.
It might be my unit with problems but I was deceive by the board quality.
If you purchase this product you should remember that the last version of APM firmware that can be load on a 8 bit board is the 3.2.1.
Some spare extra connectors and cables would be welcome .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Piece of garbage. Many QC issues apparent in this FC which of course affect it's performance. Not fit for purpose as advertised.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my second APM board. Up graded from Naza32 to this on my 250 quad. Love how locked in this seems to be compared to the naza. This is a great value for all the feature this board has to offer.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have two of these boards purchased on separate occasions. Both have problems. First one generates a lot of glitches on the barometer and other sensors, it can function in stabilize mode but not loiter, I suspect a bad barometer. Second unit will not do an initial calibration, sporadically will not connect to USB, and is unuseable. This makes three bad APM clones from Hobbyking, the first one was a different model which had poor solder joints on the USB which detached and destroyed the board.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
much better than my old crius v1, my deadcat flyes great with this
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • HK Pilot Micro

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。