Become a Dealer ブログ
新規登録

合計金額

$0.00

ショッピングカート 0 ショッピングカート 0 Loading...

P-51Dビッグビューティフルドール1600ミリメートルEPOワット/電気後退し、フラップ、ライト(PNF)

Generating Links

P-51Dビッグビューティフルドール1600ミリメートルEPOワット/電気後退し、フラップ、ライト(PNF)

 
価格:

Now save 節約 $0.00 $0.00

$174.95
購入済み Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
P-51D-BD-PNP
送料無料したい? クリックする こちらへ 詳細情報を参照する
これは一つの大きな泡ウォーバードです!ビーイングプラグNフライは、それはあなたが所有することを誇りになります。この1鳥を作るために十分な機能とスケールの細部を詰め、高速ビルドモデルです。

EPOフォームから作られた、このモデルは1 peice取り外し可能な翼が必要であれば容易に輸送するために、あってもテールが非ネジ止めすることができますになり、それの大きさにもかかわらず、実用的です。プレフィットサーボの電気後退は、すべてのフィールドが組み立て迅速かつ簡単に作る予め標識されています。これは、大規模なfoamie年代に現在、非常に一般的になっている4Sパックの種類を使用し、チャンスはある、あなたはすでにあなたのflightboxで数を持っています。プレフィットモーターは、これらのスケールウォーバードの曲芸飛行のための電力の多くを持っているか、またはちょうどあなたの飛行フィールドをstraffing!

スケールの詳細は非常にスケール4枚羽根のプロペラ&スピナー、航海灯、調整可能な放熱器出口、増槽、成形排気スタブと銃があり、事前に適用デカールがそうであるように、機能がプリインストール電気後退/ tailwheelを含む、単に素晴らしいです。フラップが右側ダウン着陸速度を保つため、このモデルは全く厄介なウォーバード先端失速傾向を持っていない、それだけでトレーナーのようで浮かびます。あなたはウォーバードを所有している夢見てきたが、あなたは彼らが飛ぶことが「困難」であることについて聞いたことがあるすべての話によって先送りされた場合、これはあなたのためのモデルです!

仕様:
翼幅:1600ミリメートル
長さ:1400ミリメートル
フライング重量:2800グラム
モーター:45-58ブラシレス
ESC:80A BEC /ワット
プロップ:16x6四ブレード
サーボ:9グラム×4、17グラム×2
後退: 電気Servolessタイプ
6チャンネル(thottle、エルロン、エレベーター、ラダー、撤回、フラップ)

含まれています:
すべてのハードウェア
取扱説明書
のり

必要なもの:
独自の6チャンネルTX / RX
3200mAh〜4000mAh 4S Lipolyバッテリー
*によるこのモデルのサイズに、注意してください、それは良いconitionに到着する箱入りダブル出荷されます。
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Crooky | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 19, 2014

I cannot believe the abysmal quality if Hibbyking parts and the fact people continue to buy this crap.
My son and I bought a P51 each, neither motors worked and finally when we got a working motor BOTH ESC's ceased working.
Additionally my sons 1600 Edge had exactly the same problem.
When you then have to replace the retracts and servos or risk an air failure, you are better off spending the $$$ on quality planes and equipment.

Crooky | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 06, 2014

Because I'm waiting, waiting, waiting for Hobbyking to get their act together and send me a working motor I am nevertheless very busy.
The tail wheel pull cable is poorly thought thru so I've replaced it with push/pull rods.
Both flap servos have literally burst into flames just sitting idle so they are replaced, obviously.
Retracts seem to have a mind of their own and I'm really tempted to just replace them even before it flies.
On another note, balance was so far out I needed about 6oz of lead at the firewall. This I find amazing that a model could be so off balance.
Summary, a great plane once you spend another few hundred bucks making it flyable.
Another piece of rubbish.

Crooky | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 03, 2014

After two other planes from HobbyKing, both with missing or defective parts I was apprehensive, and HK did not disappoint.
My motor was used, second hand. The prop mount screws were wrong gauge to the holes in the motor and the holes all had stripped threads.
The motor mount is off centre so I need to mount an adaptor to align it centrally.
There was no cover tape for the servos, and as another person noted, one of the flap servos was red and burned out immediately, (I don't mean after a few minutes, IMMEDIATELY) so I've replaced that one.
Not having run the motor yet, I can't comment on the prop mount or balance, let alone flight until,HobbyKing take their usual 2 weeks to even get a warranty claim moving. I'm not looking at getting a replacement from then for at least a month so it's off to buy a replacement in the meantime.
Yes I'm pissed off.

John | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 14, 2013

Well after a fare bit of fiddling I got to do a maiden flight with BBD.
My local club, has a field, sound cool but it's a field not much bigger than a football pitch with large hedges down both side so park flyer really,we keep well mown so short field grass , anyway weather was nice and the wind light.
Taking off (no flaps ) at less than half throttle, and we were up and away ,nice and smooth and scale like,just a few licks of trim and she's flying "hands free" no problem ,she flies really nice, very scale,not over powered on 4s 4000mah but plenty there for all the normal, loop rolls,stall turns,hammer heads etc, all with graceful ease.
She does needs a fare hand on the rudder to keep her tracking nice,or the tail drops to the inside do the turn,
This bird does have great presence and really looks the part in the sunset evening sky and sounds sweet with the 4 blade prop .There's no nasties, no tippy stalls, she just float around really sweet.
landing is trainer stuff....line her up keep the prop spinning and just float in (no flaps) slow her down and touch down nice and gentle ... ah!!!! ..right hand LG gave way as she stopped. So Playtime over.
So,yes the LG is pretty poor ,after a stripping down the a-fending retract , its would seems that one of the two very tiny micro switches ( 2mm x 3mm) that regulate the travel had popped off it mounting.The problem is , it

ratherbeflyin | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 11, 2013

purchased this plane recentlt.very happy with the fit and finish,however my motor is defective ,when running at slow speeds the motor magnets are rubbing because the can is out of round.....with keeping the stock 4 blade prop on and keeping the same esc,WHAT WOULD A GOOD QUALITY MOTOR REPLACEMENT BE RUNNING A 4S 4000MAH BATTERY?OF COURSE I WOULD WANT TO FIT IT IN WITH NO ALTERING PLANE OR MOUNT?HAS ANYONE DONE THIS?APPARENTLY THIS IS A 400 KV MOTOR,TO GET A LITTLE BETTER PERFORMANCE SHOULD I BE GETTING A 450 KV?ANYONE .......????

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 10, 2013

this is one sweet mustang,for the money, i havent had any problems with the retracts,however,i re-did the plywood mount with a thicker wider piece of ply,re-screwed back in,and gorrilla glued...noe good,package came perfectly packed,your an ace hobby king!

homeboy46 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 12, 2013

I love this plane but ther are some parts that you will need to fix, like the horns for the flaps ant Togo and the vertical stabiliser need better instructions too, but still a good buy,

DNS-NL | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 28, 2012

Beautifull EPO plane !

Looks like any other balsa plane, good quality EPO.

The only point of critisism is the weak fastening of the landing .
It is attached to the EPO. There is on youtube a good tutorial on how to strengten the gear, do this and you have lot's of fun with this warbird !


http://www.youtube.com/watch?v=xS7Im3RESEw&feature=youtube_gdata_player

Eloute | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 13, 2012

Its a nice plane but there are issues with the retracts. The retracts only successfully cycled once the one burnt out. The only retract still working is the tail wheel now. I havent flown the plane yet as it didnt come with any bolts to hold the wing down. Hobbyking was no help so I made my own hold down bolts from M4 threadded rod.

papamarnix | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 01, 2012

Have received mine a while ago and i`m very pleased with it. Just 2 things that need a little attention. for 1 the landing gear is weak an flumsy as you can read in all the other reviews. second, the plating on witch the engine is mounted is thin and weak. you might also test the servo`s as they are not the best quality. I Replaced all these weak spots and now its a real stunning plane. flies easy and predictable jet quite fast. easy to take off and land. And even if you replace all servo`s and gear still it`s a bargain.

  1. 1
  2. 2
  3. 3
顧客ファイル
No File Name Download [26]
No File Name Download [2418]
No File Name Download [2418]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!