新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • USA

バンド3ミリメートルのw /セーバープロップ

バンド3ミリメートルのw /セーバープロップ

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
3 g
SKU:
OR019-00502-3m
商品概要

バンド/ W合金プロップセーバー&アダプター
重量:2.5グラム

あなたのサイズについては、以下を選択してください。
利用可能:3ミリメートル

Product
Specifications

追加情報

  • 単位:
    OR019-00502-3m
  • Brand:
    N/A
  • 重量(g )
    3.00
  • 長さ
    0.00
  • Width:
    0.00
  • 高さ:
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The prop save design is a little different than I am use to, but seems to be reasonably well made. The body is aluminum with steel screws.



The weight of the body alone is 2.51gm or 3.1gm with the O-ring. The body as a very snug (more than my other prop savers) fit to the motor shaft an measured in at .118in or 2.997mm.



The projecting shaft sticking out the front is a .152in diameter (3.861mm) and nicely fits the standard prop adaptor rings from APC.



The O-ring is VERY strong compared to small rubber bands.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For the price it can not get any better. It fits on the shaft like it is supposed to. Only ting I had to do when using gws props is bore or drill the hole out oversize to fit over the prop saver. Having the shat running thru the prop makes it pretty much universal just have to have the proper diameter hole in the prop and it will fit on there. Overall it does the job that it is supposed to do.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For the price it can not get any better. It fits on the shaft like it is supposed to. Only ting I had to do when using gws props is bore or drill the hole out oversize to fit over the prop saver. Having the shat running thru the prop makes it pretty much universal just have to have the proper diameter hole in the prop and it will fit on there. Overall it does the job that it is supposed to do.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For the price it can not get any better. It fits on the shaft like it is supposed to. Only ting I had to do when using gws props is bore or drill the hole out oversize to fit over the prop saver. Having the shat running thru the prop makes it pretty much universal just have to have the proper diameter hole in the prop and it will fit on there. Overall it does the job that it is supposed to do.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For the price it can not get any better. It fits on the shaft like it is supposed to. Only ting I had to do when using gws props is bore or drill the hole out oversize to fit over the prop saver. Having the shat running thru the prop makes it pretty much universal just have to have the proper diameter hole in the prop and it will fit on there. Overall it does the job that it is supposed to do.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased this propsaver for a motor with very short axle. Now i can mount a prop there very good. very cheap and good quality
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality, does what its supposed to. Excellent price!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I found the prop shaft a little for my liking, I just cut it back to about 3mm. Works fine that way.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This propsaver is great. Lightweight, inexpensive and fit's 3mm shaft nicely. I'm using it with the smaller GWS DD props, like the 4040 and 5043 and they fit great. I just wish they had more in stock.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
La longueur des vis et la tension de l'lastic font de cet article au demeurant parfait plutt un support d'hlice qu'un protecteur d'hlice. Sinon, excellent rapport qualit prix

Piloo
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。