XK A280 (RTF) P-51D Mustang 4ch RC WW2 Fighter w/2.4GHz Tx, Brushless Motor & 3D/6G Gyro System 560mm

This beautiful scale model of a North American P-51D Mustang WW2 fighter plane with brushless motor, working LED lights, and 3D/6G gyro stabilization system not only looks fantastic, but it flies superbly as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 3D/6G stabilization system is switchable between beginner mode and 3D mode via a simple push button on the top of the transmitter. In full stabilization mode, the amount of pitch, roll, and yaw is limited, plus it mixes in a small amount of rudder with the ailerons to enable it to perform perfectly coordinated turns, ideal for beginners. In 3D mode, it will allow the P-51D to carry out a whole host of aerobatic maneuvers such as rolls, loops, inverted flight, and so much more. If you have 3D mode selected and get into a muddle whilst flying, a simple press of the button will return the model to the fully stabilized mode and it will return to normal level flight. The supplied transmitter also has an aileron and elevator rates function, once again this is a simple push button that will increase, or decrease the amount of throw of the control surfaces. Also included is a fail-safe system which will prevent any flyaways if the signal is lost between the transmitter and receiver. The very bright LED lights are also controlled from the transmitter, modes include on, flashing, and off, these really add realism to your P-51D.

The model is very quick to assemble and all the necessary tools are supplied in the box, no gluing is required. All the components are screwed together, which makes it perfect if you want to fit it back into its box for transporting, this makes it an ideal companion to take with you on vacation!

If you wish to fly the P-51D with your own transmitter then the included receiver/gyro board can operate with Futaba S-BUS receivers or any other receivers with S-BUS ports. It will also work with multi-protocol transmitters if the correct protocol is set, details in the user manual.

The model is supplied with everything you need to fly out of the box (except Tx batteries) including a spare propeller and spinner, a 7.4V 600mAh battery, and a USB balance charger.

Features:
• A beautiful ready-to-fly scale model of a North American P-51D Mustang
• Supplied with everything you need to fly including a 2.4GHz transmitter (Tx batteries not supplied)
• Includes a 3D/6G switchable gyro system making it suitable for beginners and experts
• Manufactured in tough, durable, crash-resistant EPP foam
• LED lights with mode switching from the TX
• Has the ability to use your own TX and S-BUS receiver
• Approx 7-minute flight time

Specs:
Type: XK A280 (RTF) P-51D Mustang 4ch RC WW2 Fighter
Wingspan: 560mm
Length: 495mm
Channels: Ailerons/Elevator/Rudder/Motor/Rates (High-Low)/Gyro Mode Select
Motor: 1806-2000KV brushless
Propeller: 6" 4-blade
Gyro: 6-Axis switchable (fully stabilized mode/3D mode)
Transmitter: 2.4GHz
Servo: 4 x 2g micro (ailerons x 2/elevator/rudder)
Range: Approx 100 meters
Battery: 7.4V 600mAh 25C LiPo
Charger: USB type
Flight Time: Approx 7 minutes
Weight: 230g (w/battery)

Includes:
1 x XK A280 (RTF) P-51D Mustang 4ch RC WW2 Fighter airframe in EPP w/motor, servos, receiver, 6-axis gyro & LED lights
1 x Clip-in main landing gear & tailwheel
1 x Pair drop tanks
1 x 2.4GHz transmitter
1 x Spare propeller and spinner
1 x 7.4V 600mAh 25C LiPo battery
1 x USB balance charger
1 x Screwdriver
1 x Prop wrench
1 x Hex wrench
1 x Spare screw set
1 x User Manual

Requires:
6 x "AA" batteries for transmitter