Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Atmel Atmega Socket Firmware Flashing Tool

Generating Links

Atmel Atmega Socket Firmware Flashing Tool

Prijs:

Now save bespaar € 0,00 € 0,00

€ 24,40
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
332000007
Geen verzendkosten? Klik hier meer leren!

Deze geniale tool maakt het flashen van de Atmel Atmega MCU te vinden in vele SER's of andere apparaten met behulp Atmega processors een wandeling in het park. Geen behoefte om te solderen of maak omslachtige clip op apparaten, sluit de socket knipperende gereedschap om een ​​USBasp AVR apparaat en plaats de bus over de blootgestelde Atmel MCU!

Uniek en exclusief voor Hobbyking dit handige apparaat zal een favoriet in de doe-het-arsenaal geworden.

Kenmerken:
Hoogtepunt precisie.
Breed scala aan toepassingen.
Snel en gemakkelijk, geen solderen nodig.

specificaties:
Met een nauwkeurigheid: ± 0,05 mm
Veerkracht: [± 20%]
17,0 g (0.593oz) bij de eerste reis
40,0 g (1.418oz) aan 1,70mm (0,0669) aanbevolen reizen
52.0g (1.827oz) aan 2.50mm (0,0984) vol reizen
Socket: Phosphor Bronze / Vergulde
Plunger: gehard Beryllium koper / Vergulde
Barrel: Phosphor Bronze / Vergulde
Spring: Muziek Wire / Vergulde
Behuizing: LG Chem ABS-AF312
Kabellengte: 420mm

vereist:
USBasp AVR programmering Inrichting voor ATMEL Keukenmachines

Past bij de Following MCU:
Atmel Atmega8, ATMega48, ATMega88, Atmega168, ATmega328

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Ted | Geverifieerde koper

  • Overall
  • Value
  • Quality

Great Idea, Mediocre Execution

Feb 12, 2017

When I saw this tool listed in the comments of a YouTube video about upgrading super cheap ESCs to SimonK circa 2015, I fell in love with the idea. The unit is very well made and very slick looking. The pins even have a spring loaded property. However, programming Atmel chips was pretty hit or miss. The first 3 ESCs went OK with just a few re-attempts required. By the fourth ESC, the tool was shot. It took two days, several modifications to the tools, and about 50 attempts to get that last ESC programmed. Even then the tool was not steady enough to verify the write, but the ESC works. So the tool cost more per programmed ESC than the ESCs themselves. Next time I will just solder tiny wires to the Atmel chip.

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 03, 2016

a must have for updating your ESC's and very easy to use

greenbigfrog | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 26, 2016

Very great and helpful tool! Get someone else to hit enter!

trevpez | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Dec 11, 2015

poorly made managed to flash 4 ESC's. It stopped working. I thought I'll just replace it but the price has tripled. DON"T waste your money

T0RP3D | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 11, 2015

Really good flashing connector, easy to use and good quality, i recommend this to anyone!.. thanks HK!,

Veter | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 29, 2015

Expensive ... but I could not find anywhere else.

jan | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jul 21, 2015

My tool had a wrong pin connection !! ground pin was wired to wrong pin on usbasp header :( i had to cut the heatshrink and resolder to the correct pin.
Sending it back would have cost me more then repairing it myself. to bad....

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 19, 2015

great product, good instructional video

Naoki | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

May 03, 2015

Great product. Does exactly what it should do, used it to flash my spider opto 30A esc. No issues with flashing and it fit perfectly onto the chip. Don't forget to buy the adapter for the usb cable, you wont be able to hookup to your PC without it.

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 28, 2015

Indispensabile per esc, turnigy multistar da flashare assolutamente.

Klantbestanden
No File Name Download [48]
Tool orientation Download [226]
flashing list Download [304]
Flashing your ESCs Download [4099]
List of compatible ESC's and hex files Download [250]
Atmel 6-10pin diagram Download [61]
10-6 Adapter Layout (Connect old 10p fla Download [85]
Setup on win 8.1 Download [0]
Picture of adapter pinouts with labels Download [76]
Picture of USBasp pinout with labels Download [97]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!